View Single Post
Old 10-31-2012, 01:41 PM   #459
FuJi K
Scooby Guru
 
Member#: 3687
Join Date: Jan 2001
Chapter/Region: MWSOC
Location: St. Paul, MN
Vehicle:
MY99 GF4 JDM 6spd
NF Performance

Default

Quote:
Originally Posted by manitou
Very very nice! You look to be getting them dialed. Have you flow tested any of your latest ones? Thanks!
Thanks for the kind words! I like it that I can port all the current '02+ heads the same style.

I have not flowed the heads since the last flow numbers posted in the thread. Flow numbers vary slightly head to head depending on the valve job done and valve size. My flow numbers from the start was all on stock valves using the stock cams to open the valves. There was actually one head that was flowed with +1mm valves and porting work. The link can be found in the first post. I don't think we actually came close to getting the full .400" lift but as far running stock cams, that's how much more gains you have. You can expect more flow with performance cams.
* Registered users of the site do not see these ads.
FuJi K is offline   Reply With Quote