View Single Post
Old 11-12-2012, 04:12 AM   #1485
pkL
Scooby Specialist
 
Member#: 313093
Join Date: Mar 2012
Chapter/Region: VIC
Location: Vancouver Area
Vehicle:
2012 Impreza 2.0i
5-door Sport. Dark Grey

Default

Quote:
Originally Posted by mrbloink View Post
It was easy! Relieve pressure on the tensioner, take the belt off, hold the pulley in place and remove the bolt. Install is the exact reverse. You will need a 22mm for the bolt, a 12 for the two bolts on the fans, and a 14 for the tensioner. I would recommend a second person to remove the bolt for the pulley, I really messed up my back doing it alone haha. It took me no longer than an hour. With a friend I would be surprised if it took you longer than 30 min.

The stock pulley weighs 4.9 lbs. I'll have pics in the morning
You ordered directly from Perrin?
http://www.perrinperformance.com/sub...a-crank-pulley

Is there anything else that would be required for the installation process? Do we need this install tool? http://www.perrinperformance.com/par...tallation-tool
* Registered users of the site do not see these ads.

Last edited by pkL; 11-12-2012 at 04:23 AM.
pkL is offline   Reply With Quote