Originally Posted by Cougar4
The info doesn't show there function, just where they go.
Yeah that's where I'm getting to, I realized inwas looking at the connector wrong and upside down, I have everything but those two wired in. The biggest problem is that I'm wiring the v7 connector to the v7 harness/Ecu, some how the wires got cut
While strippig the bulk head harness away from the engine harness . 4-5 on the v7 fsm doesn't show up as 4-5 neither or in the 02/03 fsm. The 97 ecu wiring diagram doesn't even show 91/92/93 on the pin diagram. I tried to trace them on a 03 wrx and they correspond with the grounds if you use a 6 volt battery plugged into the obd connector and take a volt meter to the ecu connectors. With the ecu disconnected.