Originally Posted by ScoobyCO
I was having a similar issue where my drivers side nozzle was pointed way too low. Turns out the nozzles ARE adjustable. Firstly, you do NOT want to use the pin adjustment method as is acceptable for older vehicles because the nozzle orifices are specifically shaped to produce a fan spray and are made of easy to damage plastic.
How to adjust:
Tools: Small 1/8" flat screw driver
Above and below the orifices are horizontal slots that fit a small flat screwdriver perfectly. Insert your screwdriver in either slot and carefully adjust the nozzle up/down and left/right, as needed. You should feel and see the nozzle rotate in its housing.
Test you work, readjust, and enjoy!
Good information! Thank you!