Quote:
Originally Posted by The Phenx
Never run stud u-joint straps they are crap.
U-bolts are far superior... just make sure you mod the yoke right.
HOWEVER... if your u-joint is fitting properly they serve almost no function, and see almost 0 force.
I think you might have a seccondary issue... either excessive driveline angle, a wallowed out yoke, or a malformed u-joint. As torque related breakage should be in the joint or the shaft tubing.
|
The angle is fine, and the axle is pitched perfectly.
I came to the same conclusion, and replaced the u-joint while I was at it. If it was a fault in the yoke or joint, it should be gone now.