View Single Post
Old 12-27-2012, 07:22 AM   #244
manitou
Scooby Specialist
 
Member#: 193757
Join Date: Nov 2008
Chapter/Region: MWSOC
Location: Cedar, MI HP Techs MPS-SSLR2.5
Vehicle:
2006 XTI Limited
OBP, Junior tuned 573WHP

Default

Quote:
Originally Posted by Maxwell Power View Post
I built that block to do over 8k rpm. So hopefully when you get your injectors figured out you'll get to push it a little more.
What's the top end in revs with the D25 heads Dom, 8K?

The new injectors are going in on Friday and we're moving the IAT sensor under the IC centered on the throttle body! On the dyno the IAT was showing 175 degrees nearing the end of 4th gear pulls and the ECU was pulling timing up there. This of course was not an issue on the road but this will be the best location for the sensor!
* Registered users of the site do not see these ads.

Last edited by manitou; 12-27-2012 at 07:34 AM.
manitou is offline   Reply With Quote