Thread: EJ207 Owners?
View Single Post
Old 03-05-2013, 10:03 PM   #5805
stlnation
Scooby Newbie
 
Member#: 321805
Join Date: May 2012
Chapter/Region: MWSOC
Location: St. Louis
Vehicle:
2002 Jdm v9 STI
Blue

Default

Quote:
Originally Posted by iNfEk View Post

I assumed you were talking about the AVCS harness and wires associated with that brown connector but on the chassis side. Didn't know it was the engine side.

So the wires just come out and you didn't mess with it? That seems highly unlikely unless the copper wires itself are coming out of the connector pin and the weather rubber shielding is attached to the wire so it appears that the entire connector is coming out? I had that happen to me not on my brown connector but on headlight leveling switch harness. I kept trying to push it in but it wouldn't stay. Eventually took the wire out and no pin connector was attached. Had to remove the lock for the connector and then remove the connector pin and solder it as best I can after prying the old wire out.

Hey I just ran out and took a quick video.
But yes its the wires on the engine side. I never had to do anything to that connector. I just happened to notice last night.
* Registered users of the site do not see these ads.
stlnation is offline   Reply With Quote