View Single Post
Old 03-22-2013, 09:36 AM   #7
Aaron'z 2.5RS
Scooby Guru
 
Member#: 1026
Join Date: Mar 2000
Chapter/Region: MWSOC
Location: Hickigan
Vehicle:
'00 RS/WRX Stg5
'98 RS Stock

Default

Quote:
Originally Posted by MongoWRX View Post
How did you connect the wires from the head unit to the amp? I was having the same issue, I used crimp style bullet connectors to connect my wires and the wires from the HU wouldn't stay fully secure.The wires would move around in the connector and cause static. If you haven't already soldered the connectors on or made a solid connection by soldering the wires together, you may want to start there. I spent a little time on this and this is what I came up with and so far it's working. Also, you may want to try troubleshooting all of your connections just in case. Hope this helps
You didnt crimp properly...
* Registered users of the site do not see these ads.
Aaron'z 2.5RS is offline   Reply With Quote