Thread: ('11-'14) Premature Inner tire wear
View Single Post
Old 06-11-2013, 09:16 PM   #44
Sti_LGT
Scooby Newbie
 
Member#: 275937
Join Date: Mar 2011
Chapter/Region: NWIC
Location: Vancouver/PDX
Vehicle:
02 bugeye
silver(soon to be white)

Default

Quote:
Originally Posted by sgoldste01 View Post
I answered my own question by looking in the service manual, which states:

NOTE:
[*]Front toe-in, rear toe-in and front camber can be adjusted. Adjust if the value of toe-in or camber exceeds the tolerance range of the specification chart.[*]Other items except for front toe-in, rear toe-in and front camber that are described in the specification chart cannot be adjusted. If other items exceed the tolerance range of the specification chart, check the suspension parts and connections for deformation. If defective, replace with new parts.


So I guess my service department was correct, at least as it pertains to rear camber.
Its true you can't adjust subaru camber in the rear on stock suspension you can buy an adjustable arm but they are pretty spendy...but if your lowered then the camber will go negative depending on how low but its strange that only one side is like that from what I saw you post. You can always do a visual check of the suspension from one side to the other and see if anything is bent or just looks different
* Registered users of the site do not see these ads.
Sti_LGT is offline   Reply With Quote