View Single Post
Old 02-03-2004, 11:26 PM   #2
WRX4SNO
Scooby Newbie
 
Member#: 38876
Join Date: Jun 2003
Location: Ashburn, VA
Vehicle:
2004 WRX Wagon
WRB

Default

Just finished retrofitting a W/S system into my wagon. Was fairly easy if you're handy. Save yourself time and $$ by going to the local APS for off the shelf parts. I found a nice small water tank that fits just perfectly (when formed by heatgun), to fit in front of the battery. My pump mounts inline to the nozzles. Power is routed via fuse link, even tricked out the switch to work with illumination! Only issude is don't get a 20sec burst, as you have to hold for operation. I am checking into adding a relay for the fix. Good Luck!

Parts List:
1. STI nozzles $6
2. 5' APS washer hose & 90d elbow ftgs $5
3. APS small plastic tank ~30 oz cap. kit w/ bracket $14
4. APS replacement washer motor $12
5. STI W/S switch $14
6. 14 AWG wire and terminal connectors ~$6
7. Cable ties

Tools
1. Demmel with small grinder bit (nozzel mounting)
2. Heatgun (helps form washer tank to fit)
* Registered users of the site do not see these ads.
WRX4SNO is offline   Reply With Quote