View Single Post
Old 02-10-2004, 06:11 PM   #6
netZ
Scooby Specialist
 
Member#: 5743
Join Date: Apr 2001
Chapter/Region: Tri-State
Location: nj/nyc
Vehicle:
2007 Kia Optima
gold brick

Default Re: Omega Rally Starter - Lock Trigger

good deal... i may have to do a write up on integrating a DEI brand standalone remote starter with the factory keyless entry system. it has all the necessary wiring to bypass clutch etc!

thanks for posting the manual. i was expecting it to be more plug and play. let us know how it goes?

netZ

Quote:
Originally posted by BritSti
Well, the included manual fell short in this area.. I highly recommend getting a copy of the 04 Service manual - complete wiring/pin specs, what pin sends voltage and when etc.

Based on this and Netzs suggestions, I found than pin 6 on the Blue connector of the integrated module only sends positive voltage when the keyless entry is activated.

Using a relay I converted this positive pulse into ground out.. so hitting the lock button twice results in a double ground which is needed to trigger activation of the Omega Rallystarter.
* Registered users of the site do not see these ads.
netZ is offline   Reply With Quote