View Single Post
Old 05-07-2004, 12:34 PM   #6
All_talk
Scooby Newbie
 
Member#: 57843
Join Date: Mar 2004
Location: Thorp (Ellensburg), WA
Vehicle:
2007 Spec B

Default

Yep NAPA, they quoted me $250 for the "master" kit (rings, bearings and seals) for my EA82T. Head work should run you about $250 for valve grind, stem hight and seals (take the seals from the kit to the head guys, should save you a few bucks). If you need the cylinders bored it should run about $200 for bore, hone and block cleaning, oversize pistons are $50 each. If it does need a bore it might be better/cheaper to just go with CCR.

Gary
* Registered users of the site do not see these ads.
All_talk is offline   Reply With Quote