I posted this before but it wasn't when we had a aftermarket turbo forum and it didn't get much attention. Here it is again and here is the origional
. Also I did try what wayne suggested along with running a new ECU.
I am having alot of codes on my car. They all started when JC Sports sent me a defective Torque Chip II which messed up all my sensors and my ECU. In Fact with in an hour of install blew my ECU Fuse. I have tried replacing Both O2 sensors, which is one of the codes being thrown, with no change. The O2 Sensor are also only reading at .30V both with the new and the old ones. Here are the codes being thrown please help.
P0403 EGR Circuit Low
P1102 Pressures Sources Switching Solenoid Valve Circut Low
P0505 Idle control System Malfunction
P0443 Canister Purge Control Solenoid Valve Circuit Low
P0141 Rear O2 Sensor Malfunction
P0135 Front O2 Sensor Malfunction
Any help would be apprecited. I am thinking for some of the code that maybe I need check valves on certain vacuum lines? Also I was thinking of going TEC II but since it's running along with the stock ECU, one of the things being Idle control. I don't know if it would solve my problems.