This looks fun ! :
1.) Breather hose to intercooler hard line.
2.) don't know the exact name but its a one way valve from the stock intake hose
to the intake manifold.
3.) return vent line from the boost solenoid valve.
4.) breather from block to stock intake hose.
5.) Plugs into the alternator. (just to the left of the red boot)
6.) Breather to PCV valve under the throttle body.
7.) Knock sensor . There should be a plug that goes to that on the engine harness.
8.) Air compressor plug. (The other end is right beside it.)
So what are you doing about the ACVS ?