Thread: AP noobie help
View Single Post
Old 04-04-2005, 07:56 PM   #8
phantomsr
Scooby Newbie
 
Member#: 69071
Join Date: Aug 2004
Location: Edmonton
Vehicle:
2002 Stg2-WRX Wagon
WRB & Dust

Default

Quote:
Originally Posted by not a sho
the only time you need the same real time map as base is if you flashed a economy,anti theft etc. over your original base map.
that is how you remove the flashed economy,anti theft etc.
when you originally flash the base it automatically becomes your real time,until
you flash another real time .
you also can re-set the ecu by pulling the neg.terminal off the battery.the realtime maps you flashed will be removed.and you will now be running the same realtime map as base.
Pulling the negative terminal will definately remove the realtime maps, along with any learning that was done be the ECU. Reflashing the correct realtime map to get out of economy or valet however, does not undo any learning done by the ECU. The ECU however will starting learning whatever map you are running so if you run the economy map for a long time and want to switch back to the stg2 map, it may be best to do a reset vishnu style.
* Registered users of the site do not see these ads.
phantomsr is offline   Reply With Quote