thanks for all the input guys. I went ahead today and loaded v1.20 into the base map with the same map on realtime. I tested the boost and unfortunately not pleased yet. Of course it's too early to tell if stall still occurs or not, but so far the results with this new map compared to v1.19 are not great. The boost seems to be ~2 psi. below the v1.19 map only at 13psi max in 2nd or 3rd gears when I was getting ~14.8psi on the other map. Now I know it does take some time for the car to learn to get adjusted but do you guys think the boost will stabilize again to ~15psi? Thanks!