View Single Post
Old 05-26-2005, 02:41 PM   #1
Jaxx
NASIOC Supporter
 
Member#: 177
Join Date: Aug 1999
Chapter/Region: NWIC
Location: Boise,Idaho,USA
Vehicle:
The 93 Imp W/EJ20K
flat black

Default sr20 side feeds on a EJ20G (56k no!)

so its running

i took the rails from a 93 1.8 (glad i didn't throw it away)
the bracket for the 1.8 faces down
the bracket for the g faces up so i left the 1.8 bracket on there
cut the bracket off the ej20G rails and welded on to the 1.8 rails (i should say had then tig welded)

hard return line had to be bent back slightly but not bad other wise it was a complete bolt up
i changed the o rings in the fuel line and the grommets in the manafold (using 1.8 part numbers)



* Registered users of the site do not see these ads.
Jaxx is offline   Reply With Quote