View Single Post
Old 10-07-2001, 02:05 AM   #6
PERRIN
Former Vendor
 
Member#: 6776
Join Date: May 2001
Chapter/Region: NWIC
Default

If you go with an EJ20t you will need to get an ECU to control it. I know of a couple of people that use the Legacy turbo ECU on the EJ20t and have no problems. You can also get a Haltech or another standalone to run it. $1300 for the Haltech.

there are different ratios for the front and read diff's. All you need to do is make sure they are the same ratio's

You can use the stock tranny, but i might not last very long. If you have a 2.5 tranny you will be better off.

Motor mount are no problem, but you will need to get a legacy turbo crossmember.

All of this works for the legacy too!

The engines can be had for $1000 or less sometimes.
Plus and exhaust $900
* Registered users of the site do not see these ads.
PERRIN is offline   Reply With Quote