Quote:
Originally Posted by AKGC8
What's track width is the 818 designed for, wagon, sedan?
|
Quote:
Originally Posted by AKGC8
there are two different mounting holes for the lower control arms, spaced slightly apart. So I'm guessing it's been designed to use either wagon or sedan control arms.
|
Correct. For upper suspension pieces there are also two holes, 1 for S ride height and 1 for R ride height.
Quote:
Originally Posted by Snowphun
The kit apparently comes with new axles.
|
Axles are for the rear. It's not a complete CV assembly. You take the new axle shaft (just the steel rod more or less) and put the original front inner CV on one end and the original rear outer CV on the other to allow the rear hubs to be driven from the front output shats of the transmission.