Quote:
Originally Posted by Sullycyrus
I need someone to help me that has tools and knowledge. I really want to do the koni inserts to compliment my springs. I'm not really happy with my setup for daily driving :/ feels like something is missing and I think it is the damping. If anyone can help, ill bring the beer and in n out!
|
Its not hard at all, You have to get the strut off the car. You will probably need a 10 mm socket to do the top three, then a 19mm to do the top two the hold it to the hub. If im correct, Their is a 10 or a 12mm nut on the bottom. After that it should slide right out. Its pretty much the same on the rears. FYI, you are going to need to have a spring compresser.
the socket numbers might be off by a little, But this is me going off my head at work.