View Single Post
Old 08-06-2008, 02:25 AM   #6
methaddict
Scooby Specialist
 
Member#: 159738
Join Date: Sep 2007
Chapter/Region: SCIC
Location: SGV
Vehicle:
2004 WRB STi 620awhp
OFCD V3, FR TS, BW8374EFR

Default

Outfront motorsports quoted me $300 for a 3 angle valve job and would include the valve seals and installing my BC cams, Supertech springs and Supertech std sized black nitrided intake and inconel exhaust valves with a 3 day turn around time. This shop only deals with Subaru motors builds, but for Sand rails.

Portflow quoted me $500 including a 45 angle cut closer to the edge going into a radius. Tom from Portflow says just with the valve job it is like going 1mm over on the valves. This will include pressure testing the heads. They are definitely well versed as far as headwork especially with Honda heads and currently do all Subaru head work for Crawford Performance. This includes installation of all the parts above and I have to bring my own valve seals which is no problem since it came with my gasket rebuild kit from the dealer. Both are with no portwork.
* Registered users of the site do not see these ads.
methaddict is offline   Reply With Quote