We here at
Boomba Racing have been working hard in bringing even more products out to the market. I just wanted to take this opportunity to show you guys a little of what we have been up to and what to look out for!
First up we have added a few things to the website:
http://boombaracing.com/wrx.html
We now have the MAP Adaptors in stock in all four finishes: Red, Black, Blue, and Natural
Same for the Timing Belt Guides
Something we just completed working on was a solution for the TMIC guys looking to use our Throttle Bodies
The one area that is very easy to overlook for leaking air is the OEM Throttle Body. Subaru designs their vehicles with the notion of warranties and stock power levels. They could care less if the TB leaks at any power level above the level they designed the car for.
The best thing about our Throttle Bodies is that they are tested to withstand 70 psi, without leaking.
Prior the TB would only work with the FMIC, as the TMIC would interfere with the larger height of the new TB compared to OEM.
We knew we had to move the TMIC back, to give more clearance, so we went ahead and devised a solution! We CNC machined new brackets for both sides of the intercooler and extended the Y-Pipe. For this we took the Samco Y-Pipe and put our own flare on it.
We didn't just stop there - we designed a heat sink into the new coupler for the Y-Pipe to help dissipate heat
Now We have a TMIC that bolts to stock hole location!
Let us know what you guys think - this was done on a 2002 WRX