View Single Post
Old 03-19-2006, 09:37 PM   #5
txl146
Scooby Guru
 
Member#: 32459
Join Date: Feb 2003
Chapter/Region: Tri-State
Location: NY
Vehicle:
02 WRX VF34 (SOLD)
Junior Tuned 301whp

Default

You will have to bend a fuel line slightly in order to remove stock injectors. Be sure to use a gas to lubricate o-rings before installing pink injectors.

Here are two stock injectors:


There are two 12mm bolts holding a fuel rail

Remove this 12mm bolt that's holding a fuel line on left side of injector closest to the front bumper.

Gently lift the fuel rail up with your left hand and use your right hand to pull down the injector to separate it from the fuel rail. Make sure to disconnect the harness from the injector first.

* Registered users of the site do not see these ads.

Last edited by txl146; 08-11-2011 at 09:30 PM.
txl146 is offline   Reply With Quote