View Single Post
Old 02-09-2007, 12:43 AM   #65
GrimmSpeed
NASIOC Vendor
Member Sales Rating: (212)
 
Member#: 136396
Join Date: Jan 2007
Chapter/Region: MWSOC
Location: Minneapolis, MN
Vehicle:
2020 STI, 2022 WRX

Default

for install i also suggest loosening the 6 bolts(3 each side) that bolt into the head from the collector THEN tighten down the bolts from the crossover THEN tighten back down the 6 bolts that go into the head. this will ensure a probably seal on the crossover.
* Registered users of the site do not see these ads.

Last edited by GrimmSpeed; 02-09-2007 at 12:50 AM.
GrimmSpeed is offline