View Single Post
Old 04-25-2013, 08:29 PM   #133
HeroCrank
Scooby Specialist
 
Member#: 301089
Join Date: Nov 2011
Chapter/Region: NESIC
Location: Parts Unknown
Vehicle:
2013 Toyota Tundra
Rock Warrior

Default

Quote:
Originally Posted by hutch959 View Post
with today turbos, the real reason to let them idle a few seconds is to make sure the turbine is not still spinning (or spinning fast)
spinning with no oil pressure is bad.

i think this is correct... but others may have input.
*quoted from PTP's FAQ section*

There is a misconception that the heat retained by the turbo blanket will cause damage to the turbocharger. This is not correct. Turbochargers are designed to handle well in excess of peak engine exhaust temperatures. Maintaining the heat of the exhaust within the turbocharger will not damage the turbocharger. However, as with all turbocharged vehicles, whether utilizing OEM or aftermarket turbochargers, it is very important to not shut off the engine directly after periods of heavy acceleration. It is advised by us, as well as all OEM and aftermarket turbocharger manufacturers, to allow a period of time to let the oil (and in some cases water) circulate and cool the turbocharger. We recommend that before shutting off the vehicle after periods of heavy acceleration, you should allow one to two minutes of idling to allow the turbocharger to cool down effectively. You may also consider purchasing a turbo timer to allow the engine to idle for a predetermined amount of time after you have left and locked your vehicle.
* Registered users of the site do not see these ads.
HeroCrank is offline   Reply With Quote