Hid Hell

Dailey817 · 05-02-2009, 04:37 PM

I put a HID conversion kit on my 03 wrx and i cannot get my fog lights to work because my high beam indicator refuses to turn off. Any help? Thanks

Bluefoton · 05-02-2009, 06:28 PM

HID conversion kit in stock 03 headlights?

Ibflamethrowers...

Dailey817 · 05-02-2009, 07:49 PM

just stock housing

Spore · 05-02-2009, 08:12 PM

Have you tried putting the regular proper halogen bulbs back in and see if they work?

I thought people know by now that the electrical and lighting forum will refuse to help HID kit people...

FourOnTheFloor65 · 05-02-2009, 08:23 PM

The harness is probably wired for a 9004 plug. The wiring pinnout is different. There are two wires you need to switch in the plug. I'll let you google search for the pinnouts for both and figure out the two that need switched. This is as far as I will go to help you blind oncoming traffic with your dangerous lights.

Dailey817 · 05-03-2009, 07:14 PM

I live in the middle of bum **** no where the most i'll blind is a deer don't worry

hybrid gti 2 · 05-03-2009, 07:23 PM

I hate people who do this without projectors. Then even more when they wornt search. HID is ment to be a cheap mod so you can blind everyone and give them the wrong impression of what the setup should be if correctly used. If it was ment to be cheap every car would have it.

For mr noob. The oem wire harness has low beam and high beam in the same harness. You must split this with an adaptor. Yes you wont have high beam with one of these kits unless you do a bi-hid setup. So check your wiring if your going to blind people with this kit.

Dailey817 · 05-03-2009, 10:32 PM

So then what is the way to do it without changing stock headlights? I hate all the other looks of the jdm projectors and USDM thats why i'm doing it this way

hybrid gti 2 · 05-03-2009, 11:10 PM

Try the fx35 or have it done by LightWerkz. There are step by step instructions on another thread for the fx35. Parts can be found on ebay. Just bought my tsx projectors.

jdubya301 · 05-04-2009, 02:06 AM

have fun

http://forums.nasioc.com/forums/show....php?t=1482552

Bluefoton · 05-04-2009, 09:31 AM

What would you think of buying a pair of Hella aux lights? (not the fog ones, you need something with a long reach). They saved me from a collision with a deer more than once, and they're legal...

Dailey817 · 05-04-2009, 03:17 PM

Thanks guys
That helped alot better than just bitching at me for the conversion kit.
Appreciate the help thanks again

05-02-2009, 04:37 PM	#1
Dailey817 Scooby Newbie Member#: 202489 Join Date: Feb 2009 Chapter/Region: Tri-State Location: New Jersey	Hid Hell I put a HID conversion kit on my 03 wrx and i cannot get my fog lights to work because my high beam indicator refuses to turn off. Any help? Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Matsu****a Ballast, h3 hid bulb, 9007 hid bulbs, 9006 hid	brandonbeeb	Exterior/Styling	1	10-11-2009 12:00 PM
EDM hids in pre HID 02 bugeye, HID not ignigting	trueno92	Interior & Exterior Modification	0	10-07-2009 11:57 PM
Breast Milk & Grown Men: Oh hell yes! VS Oh hell no!	Asinine	Off-Topic	74	06-05-2007 01:52 PM
HID Lights? STi? Hells yeah!	flanagan	Interior & Exterior Modification	9	10-31-2000 02:51 AM

05-02-2009, 06:28 PM	#2
Bluefoton Scooby Specialist Member#: 141373 Join Date: Feb 2007 Chapter/Region: E. Canada Location: Quebec, QC Vehicle: 2008 2.5i-hatch - now with a HID retrofit	HID conversion kit in stock 03 headlights? Ibflamethrowers...

05-02-2009, 07:49 PM	#3
Dailey817 Scooby Newbie Member#: 202489 Join Date: Feb 2009 Chapter/Region: Tri-State Location: New Jersey	just stock housing

05-02-2009, 08:12 PM	#4
Spore Scooby Specialist Member#: 100117 Join Date: Nov 2005 Chapter/Region: VIC Location: Vancouver, BC Vehicle: 2009 Impreza 2.5i Satin White Pearl	Have you tried putting the regular proper halogen bulbs back in and see if they work? I thought people know by now that the electrical and lighting forum will refuse to help HID kit people...

05-02-2009, 08:23 PM	#5
FourOnTheFloor65 Scooby Specialist Member#: 106225 Join Date: Jan 2006 Chapter/Region: MAIC Location: Fairmont WV Vehicle: 02 WRX STied PSM 11 Taurus SHO daily	The harness is probably wired for a 9004 plug. The wiring pinnout is different. There are two wires you need to switch in the plug. I'll let you google search for the pinnouts for both and figure out the two that need switched. This is as far as I will go to help you blind oncoming traffic with your dangerous lights.

05-03-2009, 07:14 PM	#6
Dailey817 Scooby Newbie Member#: 202489 Join Date: Feb 2009 Chapter/Region: Tri-State Location: New Jersey	I live in the middle of bum **** no where the most i'll blind is a deer don't worry

05-03-2009, 07:23 PM	#7
hybrid gti 2 Scooby Guru Member#: 67004 Join Date: Jul 2004 Chapter/Region: SCIC Location: (818) 200k+ ej205 ppg 5mt Vehicle: 02 vf30 pnp wagon silver and cf	I hate people who do this without projectors. Then even more when they wornt search. HID is ment to be a cheap mod so you can blind everyone and give them the wrong impression of what the setup should be if correctly used. If it was ment to be cheap every car would have it. For mr noob. The oem wire harness has low beam and high beam in the same harness. You must split this with an adaptor. Yes you wont have high beam with one of these kits unless you do a bi-hid setup. So check your wiring if your going to blind people with this kit.

05-03-2009, 10:32 PM	#8
Dailey817 Scooby Newbie Member#: 202489 Join Date: Feb 2009 Chapter/Region: Tri-State Location: New Jersey	So then what is the way to do it without changing stock headlights? I hate all the other looks of the jdm projectors and USDM thats why i'm doing it this way

05-03-2009, 11:10 PM	#9
hybrid gti 2 Scooby Guru Member#: 67004 Join Date: Jul 2004 Chapter/Region: SCIC Location: (818) 200k+ ej205 ppg 5mt Vehicle: 02 vf30 pnp wagon silver and cf	Try the fx35 or have it done by LightWerkz. There are step by step instructions on another thread for the fx35. Parts can be found on ebay. Just bought my tsx projectors.

05-04-2009, 02:06 AM	#10
jdubya301 Scooby Specialist Member#: 139076 Join Date: Jan 2007 Chapter/Region: MAIC Location: Scranton PA Vehicle: 2002 stg2 wagon 03 suzuki sv650s	have fun http://forums.nasioc.com/forums/show....php?t=1482552

05-04-2009, 09:31 AM	#11
Bluefoton Scooby Specialist Member#: 141373 Join Date: Feb 2007 Chapter/Region: E. Canada Location: Quebec, QC Vehicle: 2008 2.5i-hatch - now with a HID retrofit	What would you think of buying a pair of Hella aux lights? (not the fog ones, you need something with a long reach). They saved me from a collision with a deer more than once, and they're legal...

05-04-2009, 03:17 PM	#12
Dailey817 Scooby Newbie Member#: 202489 Join Date: Feb 2009 Chapter/Region: Tri-State Location: New Jersey	Thanks guys That helped alot better than just bitching at me for the conversion kit. Appreciate the help thanks again