Can anybody help me find out the size of this exhaust bolt?

boredazhell20 · 10-11-2012, 06:04 PM

Had my clutch replaced and I think they forgot to put back one of the exhaust bolts.

Anybody know the size? I tried looking at the parts catalog, but it only shows part numbers for the actual exhaust parts and not the bolts that are used.

If anybody can let me know the size or a website I can order this stupid bolt let me know.

Picture enclosed

Thanks!

jrodm12 · 10-11-2012, 07:04 PM

Pull the other one out and take it to a hardware store.

theSlothy1 · 10-12-2012, 06:19 AM

If its just the exhaust hanger bolt, its 10mm x 1.25 around 25mm long

the suicidal eggroll · 10-12-2012, 11:14 AM

There are only a few different size bolts on the car. Find one of the ones with a 12 or 14mm head elsewhere on the car, check if it threads in that spot, then take it to the hardware store and buy another one.

boredazhell20 · 10-12-2012, 03:49 PM

Thanks guys. For a minute there I was about to say there is only 1 of those hanger bolts for me to take out.

I will use your suggestion and find another 12 or 14mm bolt to take off from the car and see if the threads match before I go to the hardware store.

10-11-2012, 06:04 PM	#1
boredazhell20 Scooby Newbie Member#: 220880 Join Date: Aug 2009 Chapter/Region: SCIC Vehicle: 2006 WRX Black	Can anybody help me find out the size of this exhaust bolt? Had my clutch replaced and I think they forgot to put back one of the exhaust bolts. Anybody know the size? I tried looking at the parts catalog, but it only shows part numbers for the actual exhaust parts and not the bolts that are used. If anybody can let me know the size or a website I can order this stupid bolt let me know. Picture enclosed Thanks!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-11-2012, 07:04 PM	#2
jrodm12 Scooby Newbie Member#: 296705 Join Date: Oct 2011 Chapter/Region: NWIC Location: Wa Vehicle: 05 STI Black	Pull the other one out and take it to a hardware store.

10-12-2012, 06:19 AM	#3
theSlothy1 Scooby Newbie Member#: 173321 Join Date: Mar 2008 Chapter/Region: E. Canada Location: New Glasgow, NS Vehicle: 2007 SWP WRX dom2.5xtr w/ meth & 6spd	If its just the exhaust hanger bolt, its 10mm x 1.25 around 25mm long

10-12-2012, 11:14 AM	#4
the suicidal eggroll NASIOC Supporter Member#: 51961 Join Date: Jan 2004 Chapter/Region: RMIC Location: Broomfield, CO Vehicle: 2005 STi 2012 WRX	There are only a few different size bolts on the car. Find one of the ones with a 12 or 14mm head elsewhere on the car, check if it threads in that spot, then take it to the hardware store and buy another one.

10-12-2012, 03:49 PM	#5
boredazhell20 Scooby Newbie Member#: 220880 Join Date: Aug 2009 Chapter/Region: SCIC Vehicle: 2006 WRX Black	Thanks guys. For a minute there I was about to say there is only 1 of those hanger bolts for me to take out. I will use your suggestion and find another 12 or 14mm bolt to take off from the car and see if the threads match before I go to the hardware store.