Learning View WTF!?!

OUScooby · 01-10-2013, 11:35 PM

My car has been running pretty poorly lately. It seemed like it was running really rich, with almost zero torque down low. Pulling away from a stop it felt as if it would if you tried to drive off from a stop in 3rd gear. It would hesitate and hesitate to give you power then eventually it would go. It was also occasionally stall out when coming to a stop. I just got my laptop working again today and so I pulled an LV and was shocked to see this. What could be going on here. Please help me diagnose this.

RaceFaceXC · 01-11-2013, 07:46 AM

Really bad fuel or broken parts?

quazimoto · 01-11-2013, 07:58 AM

Did you do something to your TGV's? You have two codes that appear to be affecting the pair.

OUScooby · 01-11-2013, 11:52 AM

TGVs have been deleted and tuned for, those two codes are always there (they are not CELs), they are unrelated to this.

quazimoto · 01-11-2013, 01:39 PM

Quote:

Originally Posted by OUScooby

TGVs have been deleted and tuned for, those two codes are always there (they are not CELs), they are unrelated to this.

If they are deleted and tuned for those codes should be disabled.

endrswrd · 01-11-2013, 12:43 PM

What ever it is quit driving your car. If it is pulling 10+ degrees in cruise situations you have a major issue.

There are so many things. Fuel injectors/coilpacks/sp etc. Good luck.

endrswrd · 01-11-2013, 02:02 PM

Also I was going to mention this as well, but I hadnt confirmed it yet.

OUScooby · 01-11-2013, 02:08 PM

Vacuum line from manifold back to ebcs came off. Hopefully too much damage wasn't done.

bmx045 · 01-14-2013, 12:42 PM

sounds like your tuner doesn't know what he's doing, especially if he said the tgv are tuned for and didn't even disable the codes. i suspect foul play in the rest of the tune if i had to guess. and a simple vac leak shouldn't drop your iam to 0 AND pull -11*. no way jose.

Phatron · 02-10-2013, 03:54 AM

Codes can stay in the tempory column even though they are disabled....active CEL's show up in the "memorized DTCs" on teh right hand side.

01-10-2013, 11:35 PM	#1
OUScooby Scooby Specialist Member#: 100449 Join Date: Nov 2005 Chapter/Region: SCIC Location: NoHo Vehicle: '04 WRX 0whp 0tq '99 Imp L, '72 MGB	Learning View WTF!?! My car has been running pretty poorly lately. It seemed like it was running really rich, with almost zero torque down low. Pulling away from a stop it felt as if it would if you tried to drive off from a stop in 3rd gear. It would hesitate and hesitate to give you power then eventually it would go. It was also occasionally stall out when coming to a stop. I just got my laptop working again today and so I pulled an LV and was shocked to see this. What could be going on here. Please help me diagnose this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-11-2013, 07:46 AM	#2
RaceFaceXC Scooby Specialist Member#: 165749 Join Date: Dec 2007 Chapter/Region: South East Location: stupid Florida Vehicle: 2007 No YELLING on the bus!	Really bad fuel or broken parts?

01-11-2013, 07:58 AM	#3
quazimoto Scooby Guru Member#: 70395 Join Date: Sep 2004 Chapter/Region: MAIC Location: Da-boonies,Va	Did you do something to your TGV's? You have two codes that appear to be affecting the pair.

01-11-2013, 11:52 AM	#4
OUScooby Scooby Specialist Member#: 100449 Join Date: Nov 2005 Chapter/Region: SCIC Location: NoHo Vehicle: '04 WRX 0whp 0tq '99 Imp L, '72 MGB	TGVs have been deleted and tuned for, those two codes are always there (they are not CELs), they are unrelated to this.

01-11-2013, 12:43 PM	#6
endrswrd Scooby Newbie Member#: 323908 Join Date: Jun 2012 Chapter/Region: MWSOC Location: Dayton Ohio Vehicle: 2013 BRZ ltd ISM	What ever it is quit driving your car. If it is pulling 10+ degrees in cruise situations you have a major issue. There are so many things. Fuel injectors/coilpacks/sp etc. Good luck.

01-11-2013, 02:02 PM	#7
endrswrd Scooby Newbie Member#: 323908 Join Date: Jun 2012 Chapter/Region: MWSOC Location: Dayton Ohio Vehicle: 2013 BRZ ltd ISM	Also I was going to mention this as well, but I hadnt confirmed it yet.

01-11-2013, 02:08 PM	#8
OUScooby Scooby Specialist Member#: 100449 Join Date: Nov 2005 Chapter/Region: SCIC Location: NoHo Vehicle: '04 WRX 0whp 0tq '99 Imp L, '72 MGB	Vacuum line from manifold back to ebcs came off. Hopefully too much damage wasn't done.

01-14-2013, 12:42 PM	#9
bmx045 Scooby Newbie Member#: 262684 Join Date: Nov 2010 Location: Wakefield, MA Vehicle: 2011 MCS	sounds like your tuner doesn't know what he's doing, especially if he said the tgv are tuned for and didn't even disable the codes. i suspect foul play in the rest of the tune if i had to guess. and a simple vac leak shouldn't drop your iam to 0 AND pull -11*. no way jose.

02-10-2013, 03:54 AM	#10
Phatron Scooby Guru Member#: 36033 Join Date: Apr 2003 Chapter/Region: SCIC Location: Tuning Lab Vehicle: CEO PhatBottiTuning 2006 STi GTX3582 + Meth	Codes can stay in the tempory column even though they are disabled....active CEL's show up in the "memorized DTCs" on teh right hand side.