Part Identification Help

stimpy · 08-15-2003, 01:20 PM

I got a mess of stuff the other night and I am trying to sort through it all. Below you will find two pictures of unknown parts. I believe the first one is the FBC, but I am not sure. The second one I don't have a clue as I've never seen it before. I'm also trying to find the fuel pump controller which isn't jumping out at me...

-Jon

Jaxx · 08-15-2003, 02:03 PM

ooh oho i know this one

1st fbc -correct
2nd ballast for the day time running lights -throw away

GLwagon · 08-17-2003, 11:54 PM

Quote:

Originally posted by Jaxx
2nd ballast for the day time running lights -throw away

BZZZZZT, oh sorry the correct answer we were looking for was "what is the resistor for the day time running lights"

stimpy · 08-22-2003, 12:43 AM

Next up on the identification block...

My bets are that it is the ABS relay connector, however I'm not 100% because the surrounding connectors don't look like they match up with the diagrams.

Eversifted through 160 pages of wiring diagrams and 50lbs of wiring, hehe? What a pain in the arse.

-Jon

AWJunkies · 08-22-2003, 04:15 AM

ABS no it isn't I am pretty sure cause that plug does not run with those wires. It is run seperate all by itself to its sensors and so on. ABS is a stand alone kinda thing doesn't flow with engine harness.

And yes I have looked through about 300 pages of diagrams and manuels. Also sat next to same amount of wires. Lets see if I can get my pic to work. YOu can correct me if I am wrong but that is what I encountered in my car!

SOME OF THE WIRES

stimpy · 08-23-2003, 07:05 PM

There is nothing else that it could be besides ABS. I've laid out my wiring harness and everything lines up perfectly to the connectors surround this location. Besides that, it is made my Bosche and I know that Bosche was contracted to do the ABS for the WRX. The organization for the ABS is most likely different on the RS.

-Jon

AWJunkies · 08-23-2003, 09:17 PM

It is ABS looked in some diagrams only thing is it shouldn't be with that bulk of wires. Correct?! that is where the confusion is.

Austin · 08-24-2003, 02:03 AM

For starters, what wiring harness is that connector on?

stimpy · 08-24-2003, 11:33 AM

MY03 WRX Sedan.

-Jon

Austin · 08-24-2003, 01:15 PM

Yes, but which wiring harness?

Front wiring harness, engine compartment bulkhead wiring harness, engine wiring harness, cabin bulkhead wiring harness (I'm guessing that one?), rear wiring harness?

How many pins/how many wires?

stimpy · 08-24-2003, 02:22 PM

Regardless of how they define the harnesses, it is all one harness. The different harnesses, in my opinion, are merely an easier means to identify locations of components. I've seen no easy way to seperate any of the three harnesses I have. But since you asked, it is the front wiring harness. It is located right next to the RH headlight, the RH turn signal, the RH abs sensor, RH side market, and RH radiator fan.

It has ~30 pins, but its not the easiest to count. I have just spent the last 15 minutes tracing wires, counting pins etc and I have it 100% confirmed that this is the ABS Control Module connector, id B301. The main ABS power wire traces from the connector to fuse #8 in the main fuse box.

-Jon

Jaxx · 08-24-2003, 03:15 PM

yes it is the abs that pice hooks right into the abs pump right behind the passenger head light

Austin · 08-24-2003, 03:35 PM

What MY are the harnesses from?

Austin · 08-24-2003, 03:40 PM

For MY02, the front wiring harness includes F49, which is the 31 pin ABS control module connector.

For MY04, the engine compartment bulkhead wiring harness includes B301, which is the 31 pin ABS control module connector.

Austin · 08-24-2003, 03:41 PM

Here are pics from the MY04 Impreza manuals for the engine compartment bulkhead wiring harness.

Austin · 08-24-2003, 03:43 PM

Here are pics from the MY02 Impreza manuals for the front wiring harness.

stimpy · 08-24-2003, 04:00 PM

It's a MY03

But it's ok, I've got MY02-MY04 wiring diagrams.

It was mostly me doubting my ability to read the diagrams properly.

-Jon

08-15-2003, 01:20 PM	#1
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	Part Identification Help I got a mess of stuff the other night and I am trying to sort through it all. Below you will find two pictures of unknown parts. I believe the first one is the FBC, but I am not sure. The second one I don't have a clue as I've never seen it before. I'm also trying to find the fuel pump controller which isn't jumping out at me... -Jon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Part Identification Help	STiRA-435	Brakes, Steering & Suspension	2	05-25-2009 09:16 AM
Help with part identification	atlblu	General Community	1	07-06-2008 10:34 AM
Engine part identification help...	02blueru	Factory 2.0L Turbo Powertrain	2	05-12-2008 03:03 PM
Part identification help needed	Trin_Starr	Legacy Forum	4	03-28-2006 10:23 AM
part identification	alphamale	Interior & Exterior Modification	5	06-07-2002 03:06 PM

08-15-2003, 02:03 PM	#2
Jaxx NASIOC Supporter Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Boise,Idaho,USA Vehicle: The 93 Imp W/EJ20K flat black	ooh oho i know this one 1st fbc -correct 2nd ballast for the day time running lights -throw away

08-22-2003, 12:43 AM	#4
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	Next up on the identification block... My bets are that it is the ABS relay connector, however I'm not 100% because the surrounding connectors don't look like they match up with the diagrams. Eversifted through 160 pages of wiring diagrams and 50lbs of wiring, hehe? What a pain in the arse. -Jon

08-22-2003, 04:15 AM	#5
AWJunkies Scooby Specialist Member#: 32934 Join Date: Feb 2003 Location: Dallas Vehicle: 99 2.5RS JDM WRX silver	ABS no it isn't I am pretty sure cause that plug does not run with those wires. It is run seperate all by itself to its sensors and so on. ABS is a stand alone kinda thing doesn't flow with engine harness. And yes I have looked through about 300 pages of diagrams and manuels. Also sat next to same amount of wires. Lets see if I can get my pic to work. YOu can correct me if I am wrong but that is what I encountered in my car! SOME OF THE WIRES

08-23-2003, 07:05 PM	#6
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	There is nothing else that it could be besides ABS. I've laid out my wiring harness and everything lines up perfectly to the connectors surround this location. Besides that, it is made my Bosche and I know that Bosche was contracted to do the ABS for the WRX. The organization for the ABS is most likely different on the RS. -Jon

08-23-2003, 09:17 PM	#7
AWJunkies Scooby Specialist Member#: 32934 Join Date: Feb 2003 Location: Dallas Vehicle: 99 2.5RS JDM WRX silver	It is ABS looked in some diagrams only thing is it shouldn't be with that bulk of wires. Correct?! that is where the confusion is.

08-24-2003, 02:03 AM	#8
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	For starters, what wiring harness is that connector on?

08-24-2003, 11:33 AM	#9
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	MY03 WRX Sedan. -Jon

08-24-2003, 01:15 PM	#10
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	Yes, but which wiring harness? Front wiring harness, engine compartment bulkhead wiring harness, engine wiring harness, cabin bulkhead wiring harness (I'm guessing that one?), rear wiring harness? How many pins/how many wires?

08-24-2003, 02:22 PM	#11
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	Regardless of how they define the harnesses, it is all one harness. The different harnesses, in my opinion, are merely an easier means to identify locations of components. I've seen no easy way to seperate any of the three harnesses I have. But since you asked, it is the front wiring harness. It is located right next to the RH headlight, the RH turn signal, the RH abs sensor, RH side market, and RH radiator fan. It has ~30 pins, but its not the easiest to count. I have just spent the last 15 minutes tracing wires, counting pins etc and I have it 100% confirmed that this is the ABS Control Module connector, id B301. The main ABS power wire traces from the connector to fuse #8 in the main fuse box. -Jon

08-24-2003, 03:15 PM	#12
Jaxx NASIOC Supporter Member#: 177 Join Date: Aug 1999 Chapter/Region: NWIC Location: Boise,Idaho,USA Vehicle: The 93 Imp W/EJ20K flat black	yes it is the abs that pice hooks right into the abs pump right behind the passenger head light

08-24-2003, 03:35 PM	#13
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	What MY are the harnesses from?

08-24-2003, 03:40 PM	#14
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	For MY02, the front wiring harness includes F49, which is the 31 pin ABS control module connector. For MY04, the engine compartment bulkhead wiring harness includes B301, which is the 31 pin ABS control module connector.

08-24-2003, 03:41 PM	#15
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	Here are pics from the MY04 Impreza manuals for the engine compartment bulkhead wiring harness.

08-24-2003, 03:43 PM	#16
Austin Scooby Guru Member#: 7089 Join Date: May 2001 Chapter/Region: NWIC Location: Moscow, ID Vehicle: 05 Legacy GT Sedan 07 4Runner Limited	Here are pics from the MY02 Impreza manuals for the front wiring harness.

08-24-2003, 04:00 PM	#17
stimpy Homicidal Maniac Moderator Member#: 1612 Join Date: Jun 2000 Location: Austin, TX Vehicle: 2008 STI	It's a MY03 But it's ok, I've got MY02-MY04 wiring diagrams. It was mostly me doubting my ability to read the diagrams properly. -Jon