Zenki Lug nut Adapter

maxiav · 10-29-2004, 09:52 AM

Where can I buy the adapter that goes on top of the lon forged aluminum Zenki lug nuts? I bought SDRs and they came with the lug nuts, but the adapter is not there, so I have to use a long 19mm socket.

Anybody has one laying around or suggest a place to buy one?

Jon Bogert · 10-29-2004, 10:02 AM

That's the great thing about Zenkis: unlike those silly spline drive nuts, you don't need an adapter. If you really want to protect the finish on them--and if your wheels have enough clearance--you can use a Porsche plastic lined 19mm socket.

maxiav · 10-29-2004, 12:34 PM

These lug nuts are long. I need a deepsocket to get them out. The problem is I need an adapter so that I can use the regular crow bar that comes with the car to remove the lug nuts.

10-29-2004, 09:52 AM	#1
maxiav Scooby Specialist Member#: 40413 Join Date: Jul 2003 Vehicle: 2001 BRP RS-T EJ257 Link'd - 252WHP 274WTQ	Zenki Lug nut Adapter Where can I buy the adapter that goes on top of the lon forged aluminum Zenki lug nuts? I bought SDRs and they came with the lug nuts, but the adapter is not there, so I have to use a long 19mm socket. Anybody has one laying around or suggest a place to buy one?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WRB STI Limited Spoiler, V-Limited Bugeye Front Lip, Emblems, Zenki Lug nuts, + more!	hoshot	Exterior/Styling	21	05-26-2009 03:07 AM
Anyone have a spare Rota lug nut adapter????	TexRex2002	Texas Impreza Club Forum -- TXIC	3	11-08-2004 04:25 PM
Zenki Lug Nuts	Revolutions Motorsports	Vendor 'For Sale' Classifieds	64	12-08-2003 06:13 PM
Zenki Lug Nuts 59.99, Grouning wire kits 59.99	DragRacing.com	Vendor 'For Sale' Classifieds	32	09-06-2003 08:47 PM
Zenki Lug Nuts	Revolutions Motorsports	Vendor 'For Sale' Classifieds	41	08-08-2003 11:33 PM

10-29-2004, 10:02 AM	#2
Jon Bogert Scooby Specialist Member#: 1133 Join Date: Mar 2000 Location: SE PA Vehicle: '02 996 C4S '95 993 '71 911 3.0 '04 STI	That's the great thing about Zenkis: unlike those silly spline drive nuts, you don't need an adapter. If you really want to protect the finish on them--and if your wheels have enough clearance--you can use a Porsche plastic lined 19mm socket.

10-29-2004, 12:34 PM	#3
maxiav Scooby Specialist Member#: 40413 Join Date: Jul 2003 Vehicle: 2001 BRP RS-T EJ257 Link'd - 252WHP 274WTQ	These lug nuts are long. I need a deepsocket to get them out. The problem is I need an adapter so that I can use the regular crow bar that comes with the car to remove the lug nuts.