|01-13-2006, 07:41 PM||#1|
Join Date: Dec 2005
Location: Gilbert, AZVehicle:
2016 WRX Limited
How-to install a stereo in a 2006 Impreza W/ PICS
Ok guys, hope this helps everyone. Moderators, can we make this a sticky?
Step 1. Remove the bezel around the shifter by lifting the rear of the bezel like so.
Step 2. Remove the (2) screws holding the radio panel in place.
Step 3. Remove the panel by pulling it towards you. The top of the panel is held in place by (2) clips. Do not just pull the bottom. Instead, pull out the bottom, and try to pop off the top section with a small flat-head screw driver at the same time. It should pop right off.
Step 4. Remove the (6) screws holding the CD player in place, and remove the CD player.
Step 5. Unclip the factory harness, remove the antena, and the grounding clip on the right side. Solder together your harness adapter (the one you picked up from the store for a 90+ Subaru) and your new aftermarket CD player wiring harness. All the colors match up.
Step 6. Now, clip you harness adapter into the stock harness you had removed from the rear of the factory cd-player.
Last edited by AZRally; 04-21-2006 at 01:27 AM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|How to install 2007 AUX Input on 2006 WRX?||GooseMan||Car Audio, Video & Security||5||08-15-2011 06:27 PM|
|How-to install a stereo in a 1993 Impreza L||rizwan||Car Audio, Video & Security||5||12-05-2009 03:26 PM|
|How to install A system in your 06 Impreza||Harley Sporty||Car Audio, Video & Security||57||02-12-2009 10:47 PM|
|How to install new pedals on a 2006 STI||Jag32||Interior & Exterior Modification||4||06-30-2006 02:24 PM|
|How to install aftermarket stereo in '02 WRX||joeroket||Car Audio, Video & Security||4||04-28-2005 08:28 PM|