2006 CGM STI - Complete Part-Out

Schell · 11-03-2007, 12:42 PM

All Parts are located in the SF Bay Area

RULES FOR THIS PART-OUT:

1) Please read the ENTIRE POST before responding or requesting parts, chances are your question will be answered by reading.

2) DO NOT PM ME - I do not want my inbox full of PMs. I will field questions through email (stipartout@hotmail.com) only.

[b]3) If it is not listed on this thread as specifically sold or not available, shoot me an email. There are a lot of misc. parts that I have not accounted for.

4) Payment and shipping: Payment will be through paypal, or cash only. Parts will ship one day a week via fed-ex ground - Every order will receive a tracking number. PAYPAL FEES AND SHIPPING ARE THE RESPONSIBILITY OF THE BUYER - NO EXCEPTIONS. Everyone who buys anything will be given my personal phone number so that you may contact me directly if you have ANY questions. I want everything to go smoothly for everyone.

5) Dibs - there are none. First one to pay gets the part(s).

6) Prices are set based on averages attained by going through for- sale and part-out threads on the forums. Mileage and condition are factors as well. Prices are minimally negotiable. Lowballers will not receive a reply.

Sorry for the facist rules, but I don't have time for many of the things I see in these threads. There are other people involved in the part-out as well and they don't have the time either.

8) Things that are NOT AVAILABLE
front fenders
HID bulbs and ballasts
driver's side side skirt
drivers side doors
front splash guard
front bumper
rear bumper
gauge cluster
sti shift boot trim - will be substituted with wrx shift boot
Stock exhaust manifold
Everything between the longblock and the rear diff. Including the Transmission, clutch and flywheel assembly, and the driveshaft.

Anyway onto the fun.

The car was driven down an embankment and hit a chain-link fence. It belongs to a friend of mine who is attending business school and does not have time to deal with this himself. I am working to get the title and copies will be provided to whomever buys the longblock. There was a lot of sheet metal damage but all the mechanics (read: engine, drive train, interior) are all perfect and most of the suspension is fine too. The car was stage 2 protuned by GST with over 10K in mods. The car only had 8,400 miles on it. This is a firesale, so everything in the car will be sold.

SIDEBAR - I have a 2006 WRX wagon (as visible in the picture above). I will be keeping some parts (transmission, etc.) what this means is that there will be some WRX parts listed here as well, I will distinguish which parts are from which car.

Engine

Longblock - $4300 SOLD
http://i173.photobucket.com/albums/w...9/IMG_9103.jpg

Absolutely Perfect condition. This is the only part that I am listing before it is out of the car. It should be out in the next few weeks. I ran a compression check on it last night (see numbers below). Numbers are slightly low due to the car being cold at the time the check was done (Can't start the car due to the intercooler being stolen at the storage yard). These are outstanding numbers. Can't ask for anything better.

The block will come with the alternator, power steering pump, A/C compressor, belts, intake manifold and TB. ECU will go with the block as well. The headers, turbo and intercooler are not included.

Compression Numbers - I have pictures of all the gauge at each cylinder.
1)127 http://i173.photobucket.com/albums/w...Printer423.jpg
2)128 http://i173.photobucket.com/albums/w...Printer417.jpg
3)127 http://i173.photobucket.com/albums/w...Printer421.jpg
4)126 http://i173.photobucket.com/albums/w...Printer416.jpg

VF-39- $400 SOLD
http://i173.photobucket.com/albums/w...9/IMG_9616.jpg
http://i173.photobucket.com/albums/w...9/IMG_9617.jpg
http://i173.photobucket.com/albums/w...9/IMG_9619.jpg

Stock radiator $150 -SOLD
This is in perfect condition.

Pedals - $125 - SOLD
http://i173.photobucket.com/albums/w...Printer597.jpg

Stock Boost Solenoid - $25 SOLD
http://i173.photobucket.com/albums/w...Printer606.jpg

Wiring harness - $750 SOLD
including dash, engine bay, ALL sensors (airbags, dccd, speed sensors), both fuseboxes.

Stock Airbox - $100 obo
no filter
http://i173.photobucket.com/albums/w...Printer404.jpg

Fuel pump, filter and float assembly with Walbro 255 fuel pump - $125 SOLD
http://i173.photobucket.com/albums/w...Printer408.jpg

Intercooler to throttlebody coupler - $10
http://i173.photobucket.com/albums/w...Printer398.jpg

Air Conditioner Evaporator core - $100 SOLD
http://i173.photobucket.com/albums/w...Printer532.jpg

A/C low pressure line - $50 SOLD

Misc A/C lines - offer
http://i173.photobucket.com/albums/w...9/IMG_9611.jpg

Motor Mounts - $50 SOLD

Tranny Mount - $25 SOLD

Pitch-stop mount - $25 SOLD

STi Intercooler Splitter $75 SOLD
http://i173.photobucket.com/albums/w...Printer543.jpg
http://i173.photobucket.com/albums/w...Printer544.jpg

Exhaust

Titek Catted Downpipe 4k miles - $400 SOLD

Stock Downpipe - $100 SOLD
http://i173.photobucket.com/albums/w...Printer161.jpg

Stock Catless uppipe - $75 SOLD

Axle-back (Possibly Magnaflow??)- $100 SOLD
http://i173.photobucket.com/albums/w...Printer162.jpg
http://i173.photobucket.com/albums/w...Printer545.jpg
http://i173.photobucket.com/albums/w...Printer546.jpg

Stock heatshield - $25 - SOLD
cut for aftermarket downpipe - comes with heatshield bracket
http://i173.photobucket.com/albums/w...Printer402.jpg

Front O2 sensor - $80 SOLD
(in header)
http://i173.photobucket.com/albums/w...Printer542.jpg

Rear 02 sensor - $60 SOLD
(in downpipe)
http://i173.photobucket.com/albums/w...Printer541.jpg

Suspension:

Whiteline 24mm Adjustable Front Swaybar BSF36XZ $130 shipped SOLD
http://i173.photobucket.com/albums/w...9/IMG_9090.jpg

Whiteline 24mm Adjustable Rear Swaybar BSR37XZ $135 SOLD
http://i173.photobucket.com/albums/w...Printer529.jpg

Whiteline Sport ALK with spacers, washers, everything $150 - SOLD
http://i173.photobucket.com/albums/w...9/IMG_9181.jpg

Aluminum Control Arms $300 with ball joints $275 without SOLD
http://i173.photobucket.com/albums/w...9/IMG_9166.jpg

Passengers side rear lateral links $100 SOLD

Passengers side trailing arm $50 SOLD

Stock front and rear Swaybars with endlinks $100
http://i173.photobucket.com/albums/w...Printer165.jpg

Whiteline adjustable endlinks (all four) - $50
Some parts of the endlinks are bent, others aren't. If you want to mix and match, you can probably get 2 good endlinks from the parts. I cannot guarantee these. Otherwise, they may be good for someone who wants extras.

Stock Struts with stock springs 7k miles - $275 SOLD
http://i173.photobucket.com/albums/w...Printer634.jpg
http://i173.photobucket.com/albums/w...Printer636.jpg

Swift Springs 04+ STi 4F902 - $150 SOLD
http://i173.photobucket.com/albums/w...Printer640.jpg
http://i173.photobucket.com/albums/w...Printer638.jpg

Front tophats - $50 SOLD

Rear tophats - $50 SOLD

Drivetrain

Axles - $350 SOLD
Both front Axles are good and the rear right is also good. The rear left is damaged, but can be repaired if one was so inclined.
http://i173.photobucket.com/albums/w...9/IMG_9625.jpg
http://i173.photobucket.com/albums/w...9/IMG_9624.jpg

Wheel knuckles and hubs (5x114.3) - $325 SOLD
Rear left bearing may be damaged.
http://i173.photobucket.com/albums/w...9/IMG_9626.jpg
http://i173.photobucket.com/albums/w...9/IMG_9628.jpg

Steering

Steering column - $50
http://i173.photobucket.com/albums/w...Printer551.jpg

Steering rack - $100
Left tierod is bent

* Registered users of the site do not see these ads.

Schell · 11-03-2007, 12:42 PM

Schell · 11-03-2007, 12:44 PM

Place holder

Schell · 11-03-2007, 12:45 PM

Retain for additional information

MSo · 11-03-2007, 01:12 PM

Hi,
Need ignition key/cylinder and immobilizer module
Price w/shipping to 11105
Mike

GST Motorsports · 11-03-2007, 09:42 PM

I could use the rear diff, I don't even really need the housing.

Mike

Schell · 11-04-2007, 12:05 PM

Replies sent.

lambtor · 11-04-2007, 03:04 PM

are the sti headlamps (complete assembly) available? i'd want both if they are HID.

lethal1 · 11-04-2007, 03:06 PM

Did the drivers side headlight survive?

tangmonkey · 11-04-2007, 05:31 PM

You selling the brakes? Are they damaged?

Schell · 11-04-2007, 07:19 PM

The brakes are in very very good condition. One caliper has a single small scratch on it, the others are perfect. One of the rotors should be turned as it has a scratch in it as well, otherwise they are in great shape. Looking for 1250 for all four calipers, rotors and pads. I will not separate rotors from calipers, I may separate front to rear. Pictures will be up soon.

FleaDog · 11-04-2007, 07:22 PM

? fenders

Schell · 11-04-2007, 07:24 PM

The headlights are available without the HID bulbs and ballasts, everything else is there. The driver's side is scuffed, but can probably be restored by someone who knows what they're doing. The passengers side is perfect. Alternatively, you could crack them open and use the projectors and levelers for a kick-ass WRX retrofit. I considered doing this, but it's too much wiring work. I am asking 300. Pictures up soon.

Schell · 11-04-2007, 07:25 PM

Quote:

Originally Posted by FleaDog

? fenders

scrapped

Noeladams · 11-04-2007, 07:39 PM

all those requirements and not a single pic???? Post up some pictures!

Schell · 11-04-2007, 08:46 PM

Quote:

Originally Posted by Noeladams

all those requirements and not a single pic???? Post up some pictures!

LOL, I have 300+ pictures that I'm sorting through and uploading to photobucket. Give me some time man!

j/k

forenote · 11-04-2007, 09:43 PM

how much for the turbo .does it have the crack or shaft play .shipped to 79925 .thank u

SedonaRed03WrX · 11-04-2007, 10:06 PM

Do you know a ballpark price on a shipping for the rear bumper to 82801 = Northesat Wyoming. Thanks

Schell · 11-04-2007, 10:22 PM

Quote:

Originally Posted by SedonaRed03WrX

Do you know a ballpark price on a shipping for the rear bumper to 82801 = Northesat Wyoming. Thanks

Please read the entire thread before you post. Thanks.

Schell · 11-04-2007, 10:24 PM

Quote:

Originally Posted by forenote

how much for the turbo .does it have the crack or shaft play .shipped to 79925 .thank u

turbo has no shaft play or crack. Price is 400 plus actual shipping and paypal. Please reply to the email address for more details.

flatthump · 11-04-2007, 11:12 PM

Can I see a pic of the total wreckage?

I am interested in the ALK but wan to make sure nothing was borked down there. I assume, since your selling the front control arms, no damage could have occured to the ALK. Let me know.

wallrat76 · 11-05-2007, 12:01 AM

Interested in the hood scoop, if you will be selling it.

Schell · 11-05-2007, 12:50 AM

pictures are up

Legacy · 11-05-2007, 01:03 PM

Bookmarking for questions later.

stit2racer · 11-05-2007, 03:20 PM

I would be interested in the chassis after you are done stripping it. I can transport it myself.

11-03-2007, 12:42 PM	#1
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	2006 CGM STI - Complete Part-Out - Now with slightly less Fascism All Parts are located in the SF Bay Area RULES FOR THIS PART-OUT: 1) Please read the ENTIRE POST before responding or requesting parts, chances are your question will be answered by reading. 2) DO NOT PM ME - I do not want my inbox full of PMs. I will field questions through email (stipartout@hotmail.com) only. [b]3) If it is not listed on this thread as specifically sold or not available, shoot me an email. There are a lot of misc. parts that I have not accounted for. 4) Payment and shipping: Payment will be through paypal, or cash only. Parts will ship one day a week via fed-ex ground - Every order will receive a tracking number. PAYPAL FEES AND SHIPPING ARE THE RESPONSIBILITY OF THE BUYER - NO EXCEPTIONS. Everyone who buys anything will be given my personal phone number so that you may contact me directly if you have ANY questions. I want everything to go smoothly for everyone. 5) Dibs - there are none. First one to pay gets the part(s). 6) Prices are set based on averages attained by going through for- sale and part-out threads on the forums. Mileage and condition are factors as well. Prices are minimally negotiable. Lowballers will not receive a reply. Sorry for the facist rules, but I don't have time for many of the things I see in these threads. There are other people involved in the part-out as well and they don't have the time either. 8) Things that are NOT AVAILABLE front fenders HID bulbs and ballasts driver's side side skirt drivers side doors front splash guard front bumper rear bumper gauge cluster sti shift boot trim - will be substituted with wrx shift boot Stock exhaust manifold Everything between the longblock and the rear diff. Including the Transmission, clutch and flywheel assembly, and the driveshaft. Anyway onto the fun. The car was driven down an embankment and hit a chain-link fence. It belongs to a friend of mine who is attending business school and does not have time to deal with this himself. I am working to get the title and copies will be provided to whomever buys the longblock. There was a lot of sheet metal damage but all the mechanics (read: engine, drive train, interior) are all perfect and most of the suspension is fine too. The car was stage 2 protuned by GST with over 10K in mods. The car only had 8,400 miles on it. This is a firesale, so everything in the car will be sold. SIDEBAR - I have a 2006 WRX wagon (as visible in the picture above). I will be keeping some parts (transmission, etc.) what this means is that there will be some WRX parts listed here as well, I will distinguish which parts are from which car. Engine Longblock - $4300 SOLD http://i173.photobucket.com/albums/w...9/IMG_9103.jpg Absolutely Perfect condition. This is the only part that I am listing before it is out of the car. It should be out in the next few weeks. I ran a compression check on it last night (see numbers below). Numbers are slightly low due to the car being cold at the time the check was done (Can't start the car due to the intercooler being stolen at the storage yard). These are outstanding numbers. Can't ask for anything better. The block will come with the alternator, power steering pump, A/C compressor, belts, intake manifold and TB. ECU will go with the block as well. The headers, turbo and intercooler are not included. Compression Numbers - I have pictures of all the gauge at each cylinder. 1)127 http://i173.photobucket.com/albums/w...Printer423.jpg 2)128 http://i173.photobucket.com/albums/w...Printer417.jpg 3)127 http://i173.photobucket.com/albums/w...Printer421.jpg 4)126 http://i173.photobucket.com/albums/w...Printer416.jpg VF-39- $400 SOLD http://i173.photobucket.com/albums/w...9/IMG_9616.jpg http://i173.photobucket.com/albums/w...9/IMG_9617.jpg http://i173.photobucket.com/albums/w...9/IMG_9619.jpg Stock radiator $150 -SOLD This is in perfect condition. Pedals - $125 - SOLD http://i173.photobucket.com/albums/w...Printer597.jpg Stock Boost Solenoid - $25 SOLD http://i173.photobucket.com/albums/w...Printer606.jpg Wiring harness - $750 SOLD including dash, engine bay, ALL sensors (airbags, dccd, speed sensors), both fuseboxes. Stock Airbox - $100 obo no filter http://i173.photobucket.com/albums/w...Printer404.jpg Fuel pump, filter and float assembly with Walbro 255 fuel pump - $125 SOLD http://i173.photobucket.com/albums/w...Printer408.jpg Intercooler to throttlebody coupler - $10 http://i173.photobucket.com/albums/w...Printer398.jpg Air Conditioner Evaporator core - $100 SOLD http://i173.photobucket.com/albums/w...Printer532.jpg A/C low pressure line - $50 SOLD Misc A/C lines - offer http://i173.photobucket.com/albums/w...9/IMG_9611.jpg Motor Mounts - $50 SOLD Tranny Mount - $25 SOLD Pitch-stop mount - $25 SOLD STi Intercooler Splitter $75 SOLD http://i173.photobucket.com/albums/w...Printer543.jpg http://i173.photobucket.com/albums/w...Printer544.jpg Exhaust Titek Catted Downpipe 4k miles - $400 SOLD Stock Downpipe - $100 SOLD http://i173.photobucket.com/albums/w...Printer161.jpg Stock Catless uppipe - $75 SOLD Axle-back (Possibly Magnaflow??)- $100 SOLD http://i173.photobucket.com/albums/w...Printer162.jpg http://i173.photobucket.com/albums/w...Printer545.jpg http://i173.photobucket.com/albums/w...Printer546.jpg Stock heatshield - $25 - SOLD cut for aftermarket downpipe - comes with heatshield bracket http://i173.photobucket.com/albums/w...Printer402.jpg Front O2 sensor - $80 SOLD (in header) http://i173.photobucket.com/albums/w...Printer542.jpg Rear 02 sensor - $60 SOLD (in downpipe) http://i173.photobucket.com/albums/w...Printer541.jpg Suspension: Whiteline 24mm Adjustable Front Swaybar BSF36XZ $130 shipped SOLD http://i173.photobucket.com/albums/w...9/IMG_9090.jpg Whiteline 24mm Adjustable Rear Swaybar BSR37XZ $135 SOLD http://i173.photobucket.com/albums/w...Printer529.jpg Whiteline Sport ALK with spacers, washers, everything $150 - SOLD http://i173.photobucket.com/albums/w...9/IMG_9181.jpg Aluminum Control Arms $300 with ball joints $275 without SOLD http://i173.photobucket.com/albums/w...9/IMG_9166.jpg Passengers side rear lateral links $100 SOLD Passengers side trailing arm $50 SOLD Stock front and rear Swaybars with endlinks $100 http://i173.photobucket.com/albums/w...Printer165.jpg Whiteline adjustable endlinks (all four) - $50 Some parts of the endlinks are bent, others aren't. If you want to mix and match, you can probably get 2 good endlinks from the parts. I cannot guarantee these. Otherwise, they may be good for someone who wants extras. Stock Struts with stock springs 7k miles - $275 SOLD http://i173.photobucket.com/albums/w...Printer634.jpg http://i173.photobucket.com/albums/w...Printer636.jpg Swift Springs 04+ STi 4F902 - $150 SOLD http://i173.photobucket.com/albums/w...Printer640.jpg http://i173.photobucket.com/albums/w...Printer638.jpg Front tophats - $50 SOLD Rear tophats - $50 SOLD Drivetrain Axles - $350 SOLD Both front Axles are good and the rear right is also good. The rear left is damaged, but can be repaired if one was so inclined. http://i173.photobucket.com/albums/w...9/IMG_9625.jpg http://i173.photobucket.com/albums/w...9/IMG_9624.jpg Wheel knuckles and hubs (5x114.3) - $325 SOLD Rear left bearing may be damaged. http://i173.photobucket.com/albums/w...9/IMG_9626.jpg http://i173.photobucket.com/albums/w...9/IMG_9628.jpg Steering Steering column - $50 http://i173.photobucket.com/albums/w...Printer551.jpg Steering rack - $100 Left tierod is bent * Registered users of the site do not see these ads. Last edited by Schell; 02-02-2008 at 01:13 PM.

11-03-2007, 12:42 PM	#2
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	Wheels and Tires: Stock silver BBS (5x114) (mild curbage) with RE070 with 90% treadwear left $800 - SOLD http://i173.photobucket.com/albums/w...Printer155.jpg http://i173.photobucket.com/albums/w...Printer156.jpg http://i173.photobucket.com/albums/w...Printer157.jpg http://i173.photobucket.com/albums/w...Printer158.jpg http://i173.photobucket.com/albums/w...Printer159.jpg http://i173.photobucket.com/albums/w...Printer160.jpg 2 Rota P-45F wheels 18x8.5 (set of 2) - $75 each SOLD Gunmetal with polished lip. Also determined to be true by Wheelworks in Walnut Creek. http://i173.photobucket.com/albums/w...Printer438.jpg http://i173.photobucket.com/albums/w...Printer441.jpg Mcguard spline drive lug nuts (somewhat scratched) - $35 SOLD OEM lugs and Locking lug nuts with key - $20 Shipped http://i173.photobucket.com/albums/w...Printer170.jpg http://i173.photobucket.com/albums/w...Printer172.jpg BBS centercaps - $10 apiece - SOLD http://i173.photobucket.com/albums/w...Printer348.jpg Rota Centercaps - $10 apiece http://i173.photobucket.com/albums/w...Printer173.jpg Bridgestone RE-01R - $500 SOLD 245/40/18 Brakes Master Cylinder - $100 SOLD http://i173.photobucket.com/albums/w...Printer648.jpg ABS Proportioner Valve - $75 SOLD http://i173.photobucket.com/albums/w...Printer656.jpg Brembos $1000 SOLD Comes with pads and rotors. They are in very very good shape. One of the rotors should be turned due to a scratch in the rotor. One very small scratch in one of the calipers. http://i173.photobucket.com/albums/w...9/IMG_9140.jpg http://i173.photobucket.com/albums/w...9/IMG_9144.jpg http://i173.photobucket.com/albums/w...9/IMG_9145.jpg http://i173.photobucket.com/albums/w...9/IMG_9146.jpg http://i173.photobucket.com/albums/w...9/IMG_9147.jpg http://i173.photobucket.com/albums/w...9/IMG_9202.jpg - brakes packaged to ship E-brake Cables - SOLD Exterior Shell ONLY, other parts are extra - $750 SOLD Title will be transferred to whomever buys the shell. I will NOT cut any part off of the chassis!! - if you want to buy it and cut it up, that's your business. http://i173.photobucket.com/albums/w...Printer552.jpg http://i173.photobucket.com/albums/w...Printer558.jpg http://i173.photobucket.com/albums/w...Printer559.jpg http://i173.photobucket.com/albums/w...Printer570.jpg http://i173.photobucket.com/albums/w...Printer578.jpg http://i173.photobucket.com/albums/w...Printer577.jpg http://i173.photobucket.com/albums/w...Printer576.jpg http://i173.photobucket.com/albums/w...Printer574.jpg http://i173.photobucket.com/albums/w...Printer582.jpg http://i173.photobucket.com/albums/w...Printer586.jpg http://i173.photobucket.com/albums/w...Printer566.jpg http://i173.photobucket.com/albums/w...Printer565.jpg http://i173.photobucket.com/albums/w...Printer561.jpg Headlights Drivers side SOLD - $125 Passengers side SOLD - $200 Headlights come without HID bulbs and ballasts. Projectors, high beams and levelers still present. Drivers side is scuffed. A professional could probably restore it. Trunk w/ WRX wing - $150 SOLD The trunk is scratched and will need to be repainted. No dents though. Debadged. http://i173.photobucket.com/albums/w...Printer627.jpg http://i173.photobucket.com/albums/w...Printer628.jpg Trunk tortion bars - SOLD http://i173.photobucket.com/albums/w...Printer601.jpg CGM Hoodscoop - $100 Good shape, no scratches. http://i173.photobucket.com/albums/w...Printer588.jpg Taillights - $100 SOLD Left light is slightly scratched. Would be good for someone who wants to retrofit their 07 tails http://i173.photobucket.com/albums/w...9/IMG_9119.jpg Roof Vane - $100 SOLD Pretty scratched up - would need to be painted. Comes without the side-caps. Passenger's side side skirt - $50 SOLD http://i173.photobucket.com/albums/w...Printer473.jpg Passengers side rearview mirror with motors and wiring harness - $75 http://i173.photobucket.com/albums/w...Printer151.jpg http://i173.photobucket.com/albums/w...Printer150.jpg Front bumper beam - $100 shipped SOLD http://i173.photobucket.com/albums/w...Printer143.jpg Windshield wipers/arms/motor - $40 Window Glass: Front left window glass (no tint) $100 Pending Sale http://i173.photobucket.com/albums/w...9/IMG_9208.jpg Front left automatic window motor $25 http://i173.photobucket.com/albums/w...IMG_9214-1.jpg Rear left window glass (tinted) - $75 Mildly scratched - can probably be repaired by a professional Rear left automatic window motor $25 Right front door with window glass - $150 SOLD Slight dent, can be removed by a PDR person. Window is tinted. Right rear door with window glass - $200 SOLD Good condition - no damage. Window is tinted Front Subframe - SOLD http://i173.photobucket.com/albums/w...9/IMG_9097.jpg Interior Cobb Accessport V2 (Unmarried) with GST Protuned stage 2 map - $600 SOLD http://i173.photobucket.com/albums/w...Printer164.jpg DEFI Imperial Gauges - $850 SOLD Less than 2 months old Boost gauge with sender unit Oil pressure with greddy sender unit EGT with probe DEFI hood - painted to match perfectly Control unit 2 http://i173.photobucket.com/albums/w...Printer167.jpg http://i173.photobucket.com/albums/w...Printer523.jpg Front seats - perfect shape - $575 SOLD http://i173.photobucket.com/albums/w...Printer451.jpg http://i173.photobucket.com/albums/w...Printer452.jpg http://i173.photobucket.com/albums/w...Printer456.jpg Rear seats - Perfect shape - $250 SOLD Rear seat belts with buckles - offer http://i173.photobucket.com/albums/w...Printer153.jpg Door Cards - $300 SOLD Comes with all switches and door handles. Great condition. http://i173.photobucket.com/albums/w...Printer149.jpg http://i173.photobucket.com/albums/w...9/IMG_9216.jpg http://i173.photobucket.com/albums/w...9/IMG_9194.jpg Blue Carpet - $125 SOLD http://i173.photobucket.com/albums/w...9/IMG_9602.jpg http://i173.photobucket.com/albums/w...9/IMG_9601.jpg Trunk Carpet - $25 SOLD http://i173.photobucket.com/albums/w...9/IMG_9603.jpg Ebrake Handle - $65 http://i173.photobucket.com/albums/w...Printer540.jpg Auto Dimming Mirror with compass (no homelink) - $75 SOLD Oh ***** handles - $40 (all four) Switches "C. Diff" switch - $25 SOLD http://i173.photobucket.com/albums/w...Printer510.jpg "DCCD Manu" - $25 SOLD http://i173.photobucket.com/albums/w...Printer510.jpg Headlight adjustment switch - $25 SOLD http://i173.photobucket.com/albums/w...Printer496.jpg Intercooler sprayer with switch - $100 Comes with tank, pump, nozzle and switch http://i173.photobucket.com/albums/w...Printer497.jpg Steering wheel with airbag - $350 SOLD http://i173.photobucket.com/albums/w...Printer511.jpg http://i173.photobucket.com/albums/w...Printer514.jpg Trunk and Gas-cap release levers and cables - offer http://i173.photobucket.com/albums/w...Printer549.jpg Under steering wheel trim - offer http://i173.photobucket.com/albums/w...Printer487.jpg Other under steering wheel trim - offer http://i173.photobucket.com/albums/w...Printer495.jpg Dash - offer http://i173.photobucket.com/albums/w...Printer489.jpg http://i173.photobucket.com/albums/w...Printer490.jpg http://i173.photobucket.com/albums/w...Printer485.jpg Clockspring - $100 SOLD http://i173.photobucket.com/albums/w...Printer519.jpg Passengers side front airbag - $250 http://i173.photobucket.com/albums/w...Printer517.jpg http://i173.photobucket.com/albums/w...Printer515.jpg Center console - $150 SOLD Comes with HVAC controls - DCCD switches are NOT included. STI shift boot piece has been swapped with WRX shift boot trim piece http://i173.photobucket.com/albums/w...Printer483.jpg http://i173.photobucket.com/albums/w...Printer479.jpg http://i173.photobucket.com/albums/w...Printer518.jpg http://i173.photobucket.com/albums/w...Printer481.jpg Glovebox - $40 http://i173.photobucket.com/albums/w...Printer503.jpg Gauge cluster surround bezel - $10 Rear deck lid - $50 SOLD http://i173.photobucket.com/albums/w...Printer144.jpg Map light - $15 SOLD http://i173.photobucket.com/albums/w...Printer521.jpg Dome light - $10 Front door sill trim - $25 http://i173.photobucket.com/albums/w...Printer321.jpg A-Pillar Covers - $20 http://i173.photobucket.com/albums/w...Printer507.jpg B-Pillar Covers - $20 http://i173.photobucket.com/albums/w...Printer526.jpg C-Pillar Covers - $20 SOLD http://i173.photobucket.com/albums/w...Printer145.jpg Polk Audio Db650 Front Speakers - $100 or $125 for both front and rears Comes with DB1000 tweeters and crossovers SOLD http://i173.photobucket.com/albums/w...9/IMG_9203.jpg http://i173.photobucket.com/albums/w...9/IMG_9207.jpg Polk Audio Db400 Rear Speakers - $35 SOLD http://www.crutchfield.com/App/Produ...07DB400&tp=105 Front Seatbelts - offer SOLD Rear Seatbelts - offer http://i173.photobucket.com/albums/w...Printer153.jpg Last edited by Schell; 01-17-2008 at 07:38 PM.

11-04-2007, 09:43 PM	#17
forenote Scooby Newbie Member Sales Rating: (4) Member#: 115213 Join Date: May 2006 Vehicle: 06 wrx cgm	about vf 39 turbo how much for the turbo .does it have the crack or shaft play .shipped to 79925 .thank u

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2006 WRB STi - Complete Part Out	Fitz	Complete Car Part-Out	288	07-28-2008 03:13 PM
FS NY - 2006 STi complete part out 4k miles	turbotoyzz	Complete Car Part-Out	27	01-25-2008 03:51 PM
2006 wrx STi complete Part Out (one more time)	305wrxPIMP	Complete Car Part-Out	71	11-11-2007 12:54 AM
2006 wrx STi complete Part Out	305wrxPIMP	Complete Car Part-Out	127	10-09-2007 10:33 PM

11-03-2007, 12:44 PM	#3
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	Place holder

11-03-2007, 12:45 PM	#4
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	Retain for additional information

11-03-2007, 01:12 PM	#5
MSo Scooby Specialist Member Sales Rating: (11) Member#: 5008 Join Date: Mar 2001 Chapter/Region: Tri-State Location: NY Vehicle: 2002 /6 STi GGA SRP	Hi, Need ignition key/cylinder and immobilizer module Price w/shipping to 11105 Mike

11-03-2007, 09:42 PM	#6
GST Motorsports Vendor Vendor Sales Rating: (8) Member#: 130434 Join Date: Oct 2006 Chapter/Region: BAIC Location: Hayward, CA	I could use the rear diff, I don't even really need the housing. Mike

11-04-2007, 12:05 PM	#7
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	Replies sent.

11-04-2007, 03:04 PM	#8
lambtor Scooby Newbie Member Sales Rating: (1) Member#: 159111 Join Date: Sep 2007 Location: Chicago Vehicle: 2007 Impreza 2.5i SE Urban Grey	are the sti headlamps (complete assembly) available? i'd want both if they are HID.

11-04-2007, 03:06 PM	#9
lethal1 Scooby Newbie Member Sales Rating: (3) Member#: 118403 Join Date: Jun 2006 Chapter/Region: NWIC Location: Spokane, WA Vehicle: 2002 Infiniti Q45 Dark Blue	Did the drivers side headlight survive?

11-04-2007, 05:31 PM	#10
tangmonkey Scooby Newbie Member Sales Rating: (10) Member#: 114234 Join Date: May 2006 Chapter/Region: SCIC Location: Tustin, CA Vehicle: 2002 WRX Wagon White	You selling the brakes? Are they damaged?

11-04-2007, 07:19 PM	#11
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	The brakes are in very very good condition. One caliper has a single small scratch on it, the others are perfect. One of the rotors should be turned as it has a scratch in it as well, otherwise they are in great shape. Looking for 1250 for all four calipers, rotors and pads. I will not separate rotors from calipers, I may separate front to rear. Pictures will be up soon.

11-04-2007, 07:22 PM	#12
FleaDog Scooby Specialist Member Sales Rating: (4) Member#: 96267 Join Date: Sep 2005 Chapter/Region: MAIC Location: West Chester Vehicle: '06 20G-XT'd STI CGM & NT03+M	? fenders

11-04-2007, 07:24 PM	#13
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	The headlights are available without the HID bulbs and ballasts, everything else is there. The driver's side is scuffed, but can probably be restored by someone who knows what they're doing. The passengers side is perfect. Alternatively, you could crack them open and use the projectors and levelers for a kick-ass WRX retrofit. I considered doing this, but it's too much wiring work. I am asking 300. Pictures up soon.

11-04-2007, 07:39 PM	#15
Noeladams Scooby Specialist Member Sales Rating: (10) Member#: 121517 Join Date: Jul 2006 Chapter/Region: South East Location: Greenville, SC Vehicle: 2003 WRB WRX & WHT 93L	all those requirements and not a single pic???? Post up some pictures!

11-04-2007, 10:06 PM	#18
SedonaRed03WrX Visiting NASIOC Timeout, again, because I created another account and couldn't leave well enough alone Member Sales Rating: (30) Member#: 129117 Join Date: Oct 2006 Chapter/Region: SCIC Location: Temecula Vehicle: 300/ 292 03 SRP WRX 02 PSM WRX Wagon	Do you know a ballpark price on a shipping for the rear bumper to 82801 = Northesat Wyoming. Thanks

11-04-2007, 11:12 PM	#21
flatthump Scooby Specialist Member Sales Rating: (2) Member#: 102749 Join Date: Dec 2005 Chapter/Region: SCIC Location: Fullerton, Ca Vehicle: 2005 impreza STi OBP'	Can I see a pic of the total wreckage? I am interested in the ALK but wan to make sure nothing was borked down there. I assume, since your selling the front control arms, no damage could have occured to the ALK. Let me know.

11-05-2007, 12:01 AM	#22
wallrat76 Scooby Newbie Member Sales Rating: (6) Member#: 132705 Join Date: Nov 2006 Location: Broomfield, CO Vehicle: 2006 WRX Wagon Crystal Grey Metallic	Interested in the hood scoop, if you will be selling it.

11-05-2007, 12:50 AM	#23
Schell Scooby Specialist Member Sales Rating: (20) Member#: 127976 Join Date: Oct 2006 Chapter/Region: BAIC Location: Bay Area Vehicle: 2006 WRX Wagon 6 spd White	pictures are up

11-05-2007, 01:03 PM	#24
Legacy Scooby Specialist Member Sales Rating: (33) Member#: 10188 Join Date: Sep 2001 Location: Ottawa Vehicle: 2007 Forester XT	Bookmarking for questions later.

11-05-2007, 03:20 PM	#25
stit2racer Scooby Newbie Member Sales Rating: (0) Member#: 84242 Join Date: Mar 2005	I would be interested in the chassis after you are done stripping it. I can transport it myself.