|07-18-2008, 06:16 PM||#1|
Join Date: Jul 2006
Location: Austin, TXVehicle:
Gauge install question: Remote oil sender w/ t-fitting for pressure and temp?
Been doing tons of research on gauges and gauge installs. However, I haven't read a post or thread on this topic.
I have decided on going with a remote oil pressure sender kit because of clearance issues and engine block vibrations on the sender unit of the electric gauges.
1. My question is that, do I have to buy two of these? One for the oil temp and one for the oil pressure gauge? And also use the two gallery plug locations?
2. Can I just get one of these and get a t-fitting and hook up the two senders to one remote oil kit? If I can, I would probably go this route. Any tips on this would be awesome.
I decided against the sandwich oil adapters because of the possible leaks and hassle of changing seals, etc. However, the adapter would be a lot easier because most of them have two holes to plug in senders too...
I still might go with this route if the remote senders are a PITA.
Any help and suggestions are gratefully accepted. Thanks in advance!
|Thread||Thread Starter||Forum||Replies||Last Post|
|Prosport Premium Gauges 52mm Oil Pressure and Temp Remote Oil Pressure Sender Kit||skribblez32||Interior/Dressup/Audio & Security||4||07-01-2009 03:50 PM|
|Oil pressure and temp at oil filter||aakrusen||Newbies & FAQs||9||01-19-2009 07:43 AM|
|FS: DEFI link gauges, green/black, 52mm Oil pressure and temp, and EGT||lotusdrift||MAIC Private Classifieds||8||08-12-2008 02:55 PM|
|FS: DEFI link gauges, green/black, 52mm Oil pressure and temp, and EGT||lotusdrift||Interior/Dressup/Audio & Security||7||08-12-2008 08:42 AM|
|want an oil cooler but already using a sandwitch adapter for oil pressure ands temp..||mpower22||Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo)||5||04-19-2006 03:43 PM|