The OFFICIAL E85 ARMY THREAD - Page 16

maperformance · 09-14-2009, 10:22 AM

That is not a problem. Email me over the files!

-Adam@maperformance.com

I'll check out the designs print some sample stickers and show you them on the car. Then we can start getting them out!

* Registered users of the site do not see these ads.

juanmedina · 09-14-2009, 11:18 AM

Emailed you

maperformance · 09-14-2009, 08:31 PM

Got them all. Working on them tonight!

elevenpoint7five · 09-14-2009, 09:27 PM

Now this I am excited for! ^^

maperformance · 09-14-2009, 11:47 PM

UH OH! The test ones are done!

I'll have pictures up shortly!

juanmedina · 09-14-2009, 11:57 PM

sweet

since I design them send me some for testing

maperformance · 09-15-2009, 01:07 AM

I will get some extra's I'm sure. We need to get a list of people interested. These aren't exactly cheap to print. Our single color cartridges are 75.00 a pop, and it takes 10 different cartridges!

Here is them printed on a sheet for testing for color and such. We are doing the vertical one on my e85 wagon just to get some ideas for people.

If you get people to start picking them up off us I'll sling you a set of your favorite ones!

chayashi · 09-15-2009, 02:19 AM

1)Injector size- DW 850's
2)IDC- 92%
3)elevation- ~5500 above sea level
4)turbo- ATP GT3076WG .86 a/r (TO4S compressor cover)
5)extras-Walbro, Greddy Spectrum Elite CBE, open source tune

http://www.atpturbo.com/Merchant2/me...egory_Code=GRT

Been getting E85 for $1.58 a gallon for months, and avg 16 MPG with a 64 mile a day commute, mixed highway and street. I only avg'd 22 mpg with the VF39 and an AP custom tune. Well worth the loss.

Would not have been my first choice for a turbo, powerband is essentially 4800-7k. Pretty laggy.
I think I would be happier with a 3071R. I traded stock setup and a Yamaha FZR-400 with a friend for this, which included a Blitz LM FMIC kit, Header, uppipe, DP and this turbo which only had 1200 miles on it at 16 psig max. On the donor bugeye with an EJ257 block with 205 heads, it made 335 WHP with 91 octane on the same dyno.

I made 403.0 WHP and 380.6 lbs ft at 19 psig on a Dynomite eddy current. Turbo isn't even breathing hard.
http://i305.photobucket.com/albums/n...i/P5220001.jpg

Have only made 2 passes at Bandimere, the first since my Galant VR-4 back in 2003.
Stock clutch, w/ no 2 step, yielded a crappy 12.94 at 109.2 with a 1.94 60ft.

sorrowfulkiller · 09-16-2009, 12:44 AM

I'll be putting on a vf39 on my 02 wrx soon.

So far I have
up pipe
4 inch bellmouth dp to 3 inch catback.
modded stock injectors
walbro
silicone turbo inlet
injen short ram
ebay big ass tmic
tuned on e85 on 20psi with stock turbo currently

juanmedina · 09-16-2009, 12:58 AM

sweet you 2 ^, I will add you when I have time

PEOPLE you can get the sticker from maperformance , please PM them

TY

maperformance · 09-16-2009, 01:04 AM

I am loading pictures right now of them on my car. Got the vertical one and the army green e85 and army underneath done.

todeswalzer · 09-16-2009, 01:05 AM

if only i didnt have to drive an hours ditance + going through boston to get this id be on the damn e85 frontlines

thorne · 09-16-2009, 01:15 AM

For the front page

AWD Ninja · 09-16-2009, 04:43 AM

WANT ! ! !

maperformance · 09-16-2009, 09:39 AM

Well here is the two samples on my car. I think these are the two best out of the sheets we printed from the post above. If you want another one please let us know. I'm sure we can cut it for you.

If your interested please email me or shoot a pm! Email would be best!

Email - adam@maperformance.com
Aim - adamatmap

maperformance · 09-16-2009, 06:25 PM

Thanks for all the emails, they will be shipping out within a day or two!

These are PRINTED not multi-layered vinyl. Also they are weather resistant and are laminated for extra protection!

STi Mikey · 09-16-2009, 06:50 PM

93 army stickers?

maperformance · 09-16-2009, 08:38 PM

Haha you design it. I'll cut it!

Kastley85891 · 09-16-2009, 09:06 PM

Ordered - Thanks Adam -

maperformance · 09-16-2009, 10:42 PM

Got it! Send over that 199 link!

Guy on the corner · 09-16-2009, 11:51 PM

Quote:

Originally Posted by chayashi

Have only made 2 passes at Bandimere, the first since my Galant VR-4 back in 2003.
Stock clutch, w/ no 2 step, yielded a crappy 12.94 at 109.2 with a 1.94 60ft.

I've had about 20 passes at Bandimere this year with my VF52 and your 12.94 matches my 2nd best... and your trap has my typical 107mph traps beat by 2mph. So, if you had some more passes I'm sure you'd be trapping 110mph and probably hit a lot of 12.7's and probably hit a 12.6 sooner or later. At altitude, that's damn fast. But holy crap that is a laggy turbo... I would hate that as a DD!

maperformance · 09-18-2009, 08:25 PM

Cut 35 each of the stickers above. Let me know what'chu want!

jagstyle · 09-18-2009, 08:58 PM

mcmanalot · 09-19-2009, 02:42 AM

Injector Size: 830cc Modded stockers
Injector Duty Cycle: 78%
Elevation: 1100 feet
Turbo: VF30

Went to the track tonight and ran a 12.86 @107. First time ever racing my car at a drag strip so I was pretty damn happy.

Mod List:
Tuned by MarkJonesTuning
VF30 Turbo @ 18psi
Tial 38mm EWG
Gimmick Motorsports Up Pipe w/dump tube
Catless Downpipe
Borla XR-1 catback
830cc Injectors
E85
Walbro 255 Fuel Pump
TGV deletes by me
CSS Performance FMIC
AVO short ram intake
Gimmick Motorsports AfterMaf Hose
Agency Power Turbo Inlet Pipe
Grimmspeed Boost Solenoid
Stock BPV w/Turbo XS BOV adapter
Stainless Steel Brake lines w/Motul Fluid
Hawk HPS Pads
Rotella Synthetic 5w40

TDagen · 09-19-2009, 11:12 AM

Nice work, what were you racing another suby lol?

09-15-2009, 02:19 AM	#383
chayashi Scooby Newbie Member#: 164175 Join Date: Nov 2007 Location: Denver Vehicle: 2006 STi Aspen White	1)Injector size- DW 850's 2)IDC- 92% 3)elevation- ~5500 above sea level 4)turbo- ATP GT3076WG .86 a/r (TO4S compressor cover) 5)extras-Walbro, Greddy Spectrum Elite CBE, open source tune http://www.atpturbo.com/Merchant2/me...egory_Code=GRT Been getting E85 for $1.58 a gallon for months, and avg 16 MPG with a 64 mile a day commute, mixed highway and street. I only avg'd 22 mpg with the VF39 and an AP custom tune. Well worth the loss. Would not have been my first choice for a turbo, powerband is essentially 4800-7k. Pretty laggy. I think I would be happier with a 3071R. I traded stock setup and a Yamaha FZR-400 with a friend for this, which included a Blitz LM FMIC kit, Header, uppipe, DP and this turbo which only had 1200 miles on it at 16 psig max. On the donor bugeye with an EJ257 block with 205 heads, it made 335 WHP with 91 octane on the same dyno. I made 403.0 WHP and 380.6 lbs ft at 19 psig on a Dynomite eddy current. Turbo isn't even breathing hard. http://i305.photobucket.com/albums/n...i/P5220001.jpg Have only made 2 passes at Bandimere, the first since my Galant VR-4 back in 2003. Stock clutch, w/ no 2 step, yielded a crappy 12.94 at 109.2 with a 1.94 60ft. Last edited by chayashi; 09-15-2009 at 02:47 AM. Reason: info added.

09-16-2009, 04:43 AM	#389
AWD Ninja Scooby Specialist Member#: 181980 Join Date: Jun 2008 Location: Ninja Land Vehicle: 2004 400w Ninja Cart White E85 ARMY	WANT ! ! ! Last edited by AWD Ninja; 09-16-2009 at 05:48 AM.

09-19-2009, 02:42 AM	#399
mcmanalot Scooby Newbie Member#: 174683 Join Date: Mar 2008 Chapter/Region: SWIC Location: Chandler, AZ Vehicle: 2005 E85'd WRX Wagon VF30'd 12.72 @106.76	Injector Size: 830cc Modded stockers Injector Duty Cycle: 78% Elevation: 1100 feet Turbo: VF30 Went to the track tonight and ran a 12.86 @107. First time ever racing my car at a drag strip so I was pretty damn happy. Mod List: Tuned by MarkJonesTuning VF30 Turbo @ 18psi Tial 38mm EWG Gimmick Motorsports Up Pipe w/dump tube Catless Downpipe Borla XR-1 catback 830cc Injectors E85 Walbro 255 Fuel Pump TGV deletes by me CSS Performance FMIC AVO short ram intake Gimmick Motorsports AfterMaf Hose Agency Power Turbo Inlet Pipe Grimmspeed Boost Solenoid Stock BPV w/Turbo XS BOV adapter Stainless Steel Brake lines w/Motul Fluid Hawk HPS Pads Rotella Synthetic 5w40 Last edited by mcmanalot; 09-19-2009 at 08:48 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-14-2009, 10:22 AM	#376
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	That is not a problem. Email me over the files! -Adam@maperformance.com I'll check out the designs print some sample stickers and show you them on the car. Then we can start getting them out! * Registered users of the site do not see these ads.

09-14-2009, 11:18 AM	#377
juanmedina Scooby Guru Member#: 133146 Join Date: Nov 2006 Location: SC Vehicle: 07 WRX VF39 + E85 12.142@115.547mph ;)	Emailed you

09-14-2009, 08:31 PM	#378
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Got them all. Working on them tonight!

09-14-2009, 09:27 PM	#379
elevenpoint7five Scooby Specialist Member#: 187798 Join Date: Aug 2008 Chapter/Region: MWSOC Location: Huntley IL & Griffith IN Vehicle: 2004 WRX Fueled By Corn	Now this I am excited for! ^^

09-14-2009, 11:47 PM	#380
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	UH OH! The test ones are done! I'll have pictures up shortly!

09-14-2009, 11:57 PM	#381
juanmedina Scooby Guru Member#: 133146 Join Date: Nov 2006 Location: SC Vehicle: 07 WRX VF39 + E85 12.142@115.547mph ;)	sweet since I design them send me some for testing

09-15-2009, 01:07 AM	#382
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	I will get some extra's I'm sure. We need to get a list of people interested. These aren't exactly cheap to print. Our single color cartridges are 75.00 a pop, and it takes 10 different cartridges! Here is them printed on a sheet for testing for color and such. We are doing the vertical one on my e85 wagon just to get some ideas for people. If you get people to start picking them up off us I'll sling you a set of your favorite ones!

09-16-2009, 12:44 AM	#384
sorrowfulkiller Scooby Specialist Member#: 170439 Join Date: Jan 2008 Location: Sioux Falls, SD Vehicle: 2002 WRX Silver	I'll be putting on a vf39 on my 02 wrx soon. So far I have up pipe 4 inch bellmouth dp to 3 inch catback. modded stock injectors walbro silicone turbo inlet injen short ram ebay big ass tmic tuned on e85 on 20psi with stock turbo currently

09-16-2009, 12:58 AM	#385
juanmedina Scooby Guru Member#: 133146 Join Date: Nov 2006 Location: SC Vehicle: 07 WRX VF39 + E85 12.142@115.547mph ;)	sweet you 2 ^, I will add you when I have time PEOPLE you can get the sticker from maperformance , please PM them TY

09-16-2009, 01:04 AM	#386
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	I am loading pictures right now of them on my car. Got the vertical one and the army green e85 and army underneath done.

09-16-2009, 01:05 AM	#387
todeswalzer Scooby Newbie Member#: 191495 Join Date: Oct 2008 Chapter/Region: NESIC Location: MA Vehicle: 05 Stg2 WRX WRB	if only i didnt have to drive an hours ditance + going through boston to get this id be on the damn e85 frontlines

09-16-2009, 01:15 AM	#388
thorne Scooby Newbie Member#: 130063 Join Date: Oct 2006 Location: Ohio Vehicle: 2003 WRX Silb	For the front page

09-16-2009, 09:39 AM	#390
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Well here is the two samples on my car. I think these are the two best out of the sheets we printed from the post above. If you want another one please let us know. I'm sure we can cut it for you. If your interested please email me or shoot a pm! Email would be best! Email - adam@maperformance.com Aim - adamatmap

09-16-2009, 06:25 PM	#391
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Thanks for all the emails, they will be shipping out within a day or two! These are PRINTED not multi-layered vinyl. Also they are weather resistant and are laminated for extra protection!

09-16-2009, 06:50 PM	#392
STi Mikey Scooby Specialist Member#: 114631 Join Date: May 2006 Chapter/Region: Tri-State Location: JR tuned vf43 1/4 record hldr Vehicle: 2007 450 whp STi THESHOPCT.COM	93 army stickers?

09-16-2009, 08:38 PM	#393
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Haha you design it. I'll cut it!

09-16-2009, 09:06 PM	#394
Kastley85891 Scooby Specialist Member#: 127704 Join Date: Oct 2006 Chapter/Region: TXIC Location: TX/Austin Vehicle: 09 370Z + a minivan ;-)	Ordered - Thanks Adam -

09-16-2009, 10:42 PM	#395
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Got it! Send over that 199 link!

09-18-2009, 08:25 PM	#397
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Location: Plymouth, MN	Cut 35 each of the stickers above. Let me know what'chu want!

09-18-2009, 08:58 PM	#398
jagstyle Scooby Newbie Member#: 155186 Join Date: Jul 2007 Chapter/Region: BAIC Location: NorCal Vehicle: 2007 STI

09-19-2009, 11:12 AM	#400
TDagen Scooby Specialist Member#: 163648 Join Date: Nov 2007 Chapter/Region: MWSOC Location: Minnesota, mpls Vehicle: 02wr x,2.5,BW91-79ts Moonshined,6mt07,SEIBON	Nice work, what were you racing another suby lol?