Radiator: Koyo vs PWR vs Mishimoto vs

[Byzantium]

Originally Posted by GT35RHybrid

Name brand fanboi.


It works great. I have the GMS which is very similar if not the same. Minimal hose trimming....fit like a glove.

I own a GMS. A huuuge amount of trimming and modification had to be made to get it to fit. It works great, but it most certainly didn't "fit like a glove".

[IMPORTIMAGE]

Originally Posted by JSarv

I run push and pull Slim Fans on my Honda (no name very very slim fan to fit the H in a Civic) and they work awesome- Considering in the dead of winter I idle above 200*F. I think they are $30 each + shipping.

i had the awesome PWR rad with spal fans...all top of the line stuff. in traffic it would overheat with the ac on...

changed back to stock fans...win!

[JSarv]

Originally Posted by IMPORTIMAGE

i had the awesome PWR rad with spal fans...all top of the line stuff. in traffic it would overheat with the ac on...

changed back to stock fans...win!

I wouldn't change the fans on my WRX (no reason to) but fitting an H22 in a civic requires a fan thinner than 2"....

-Jerod

[Uncle Scotty]

Originally Posted by JSarv

I run push and pull Slim Fans on my Honda (no name very very slim fan to fit the H in a Civic) and they work awesome- Considering in the dead of winter I idle above 200*F. I think they are $30 each + shipping.

Originally Posted by JSarv

I wouldn't change the fans on my WRX (no reason to) but fitting an H22 in a civic requires a fan thinner than 2"....

-Jerod

stop with the hunduha **** already

it is 100% totally irrelevant to this discussion and is, really, confusing the issue

[wrxsti.l]

I use a cheap china spec "Cooling Pro" ally rad from JustJap.com. It was $300AUD and performed better then the oem STi rad during my basic test:




Leslie