P&L Motorsports 06 STI Rotated 35R kit runs 10.12 @139 - Page 3

pharmstudentSTI · 10-24-2010, 06:25 PM

Nice driving Eddie!

* Registered users of the site do not see these ads.

sicksti1 · 10-24-2010, 08:25 PM

Quote:

Originally Posted by DoctorNick

What RPM you hitting the traps at?

sup neal! I really dont pay attention to the rpm as soon as I click in 4th. I just smash the pedal try to keep the car straight and hang on!

I think its like 7500 when I finally let off. I'll let ya know when we go back.

sicksti1 · 10-24-2010, 08:31 PM

Quote:

Originally Posted by Junior2JZ

EDDIE .. The JerZboys went 10.000@141 yesterday

I will be back in 2 weeks, we need to get that 9 sec pass and get 3 into the single digits for P&L.

I still havent taken the car apart. who knows maybe I'll pull a rabbit out of the hat and do it all in a weekend

! I think I'll just let ya run rampant boost through it and look away

thatll for sure get a 9!

hammyt · 10-24-2010, 11:28 PM

don't blow it up already eddie lol

, looking forward to the almost assured 9's from this fasteddie/junior combination.

sicksti1 · 10-25-2010, 09:18 PM

Quote:

Originally Posted by hammyt

don't blow it up already eddie lol

, looking forward to the almost assured 9's from this fasteddie/junior combination.

Trust me. At this point it can't get any worse. I think it still has a few runs left in her!

~FASTEDDIE~

Junior2JZ · 10-26-2010, 12:35 AM

Lets do this ****!!!

Jr

sam0329 · 10-26-2010, 03:33 AM

Hi P and L,

Just wondering where is my FMIC core replacement? I have been trying to emailing you guys for more than a month and have ZERO reply? Since you guys have time to post here I assume I deserve at least an email reply right? Please advice.

sicksti1 · 10-26-2010, 09:18 AM

Quote:

Originally Posted by sam0329

Hi P and L,

Just wondering where is my FMIC core replacement? I have been trying to emailing you guys for more than a month and have ZERO reply? Since you guys have time to post here I assume I deserve at least an email reply right? Please advice.

I apologize for the inconvenience As I am only a wrench at P&L. I do not know the standings of a replacement core. I would suggest calling us directly and sorting the situation. Once again I apologize that I could not help you.
~FASTEDDIE~

DJIMPREZA · 10-26-2010, 09:58 AM

engine bay pics are a must!! we need to see Ed abilities on the intercooler... does it have a/C?

sicksti1 · 10-26-2010, 10:39 AM

Quote:

Originally Posted by DJIMPREZA

engine bay pics are a must!! we need to see Ed abilities on the intercooler... does it have a/C?

I will try to get pics uploaded asap. it has 255 a/c! two windows rolled down at 55mph!

the faster you go the better it feels!

sicksti1 · 10-26-2010, 10:59 AM

pics are up people

~FASTEDDIE~

fullerton · 10-26-2010, 11:15 AM

what is this, mini pict day?

sicksti1 · 10-27-2010, 12:25 AM

i adjusted the size. I apologize.

sicksti1 · 11-15-2010, 12:35 AM

Deconstruction has begun! My car has been Jenny craiged and the fuel system is being gone through. I will post pics as soon as I have a chance.

I hope junior has his sack strapped on nice and tight!!!

KP · 11-15-2010, 05:12 AM

Nines!

Junior2JZ · 11-16-2010, 12:05 AM

Quote:

Originally Posted by sicksti1

Deconstruction has begun! My car has been Jenny craiged and the fuel system is being gone through. I will post pics as soon as I have a chance.

I hope junior has his sack strapped on nice and tight!!!

No more skirt for you!! Next time out we go 9s in another P&L Subie

BTW, I miss your couch and the puppy..

Jr

Csquared33 · 11-17-2010, 02:46 PM

seriously clean engine bay. whats the volume of your catch can?

sicksti1 · 11-18-2010, 10:27 AM

Quote:

Originally Posted by Csquared33

seriously clean engine bay. whats the volume of your catch can?

Its basicaly a 5'' piece of pipe thats 6" long and has 1 baffle plate to divide the two sides. capped off on both ends and the fittings welded on. the fittings cost more than the actual "can"

~FASTEDDIE~

Csquared33 · 11-18-2010, 06:51 PM

Quote:

Originally Posted by sicksti1

Its basicaly a 5'' piece of pipe thats 6" long and has 1 baffle plate to divide the two sides. capped off on both ends and the fittings welded on. the fittings cost more than the actual "can"

~FASTEDDIE~

figured as much, an fittings arent cheap, thought youd match the volume of the can to your displacement

jnorth85 · 12-01-2010, 11:51 AM

Dont know why I didnt see this until now, but congrats Eddie!!

sicksti1 · 12-01-2010, 11:08 PM

Quote:

Originally Posted by jnorth85

Dont know why I didnt see this until now, but congrats Eddie!!

thank you much justin! I say you throw a 30r on that gc of yours and get that in the tens also!!!

~FASTEDDIE~

xdrian · 12-02-2010, 12:33 AM

good lookin car right there!

jnorth85 · 12-02-2010, 10:51 AM

Quote:

Originally Posted by sicksti1

thank you much justin! I say you throw a 30r on that gc of yours and get that in the tens also!!!

~FASTEDDIE~

she has one!!!
the DOM 3 XTR is a 56lb compressor and 10cm hotside! and mine has the 3" inlet.

im planning on E85 in the spring should put me in the upper 400whp range and with some good driving

and possibly slicks she would hit 10's for sure!

might have to let you take your hand at it!

sicksti1 · 12-02-2010, 03:14 PM

Quote:

Originally Posted by jnorth85

she has one!!!
the DOM 3 XTR is a 56lb compressor and 10cm hotside! and mine has the 3" inlet.

im planning on E85 in the spring should put me in the upper 400whp range and with some good driving

and possibly slicks she would hit 10's for sure!

might have to let you take your hand at it!

I thought u had a smaller turbo! Lol. No worries. For the next shootout throw some sticky tire on it and hope an axle doesn't splinter!

It's gunna be one crazy season coming up with so many fast subi's! Everyone is gunna be gunning for that number one spot! Including me!
~FASTEDDIE~

jnorth85 · 12-02-2010, 03:20 PM

Quote:

Originally Posted by sicksti1

I thought u had a smaller turbo! Lol. No worries. For the next shootout throw some sticky tire on it and hope an axle doesn't splinter!

It's gunna be one crazy season coming up with so many fast subi's! Everyone is gunna be gunning for that number one spot! Including me!
~FASTEDDIE~

I cant wait for the next shootout I want to see a handfull of midwest subies runnin 10's!! your car better be single digits by then!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-24-2010, 06:25 PM	#51
pharmstudentSTI Scooby Newbie Member#: 200206 Join Date: Jan 2009 Location: Chicago Vehicle: 2008 STI WRB	Nice driving Eddie! * Registered users of the site do not see these ads.

10-24-2010, 11:28 PM	#54
hammyt Scooby Specialist Member#: 92585 Join Date: Aug 2005 Chapter/Region: MWSOC Location: Chicagoland Vehicle: 2005 Saab 9-2x Aero 13.6@100 EJ205 VF48 93Oct	don't blow it up already eddie lol , looking forward to the almost assured 9's from this fasteddie/junior combination.

10-26-2010, 12:35 AM	#56
Junior2JZ Scooby Guru Member#: 64908 Join Date: Jun 2004 Chapter/Region: Tri-State Location: Tuning 8/9sec Subies @ P&L Vehicle: 10.8 XT+ Real stock turbo record holder 11.4	Lets do this ****!!! Jr

10-26-2010, 03:33 AM	#57
sam0329 Scooby Newbie Member#: 20319 Join Date: Jun 2002 Chapter/Region: W. Canada Location: Edmonton Alberta CANADA Vehicle: 2009 P and L Blue	Hi P and L, Just wondering where is my FMIC core replacement? I have been trying to emailing you guys for more than a month and have ZERO reply? Since you guys have time to post here I assume I deserve at least an email reply right? Please advice.

10-26-2010, 09:58 AM	#59
DJIMPREZA Scooby Specialist Member#: 1199 Join Date: Apr 2000 Location: Caracas, Venezuela Vehicle: 1994 Supra+1K, 22b alike, 07STI	engine bay pics are a must!! we need to see Ed abilities on the intercooler... does it have a/C?

10-26-2010, 10:59 AM	#61
sicksti1 Scooby Newbie Member#: 161816 Join Date: Oct 2007 Chapter/Region: MWSOC Location: chicago Vehicle: 2006 sti 35r beast 10.12@139	pics are up people ~FASTEDDIE~

10-26-2010, 11:15 AM	#62
fullerton Scooby Specialist Member#: 122030 Join Date: Aug 2006 Chapter/Region: MWSOC Location: Private Profits - Social Loss	what is this, mini pict day?

10-27-2010, 12:25 AM	#63
sicksti1 Scooby Newbie Member#: 161816 Join Date: Oct 2007 Chapter/Region: MWSOC Location: chicago Vehicle: 2006 sti 35r beast 10.12@139	i adjusted the size. I apologize.

11-15-2010, 12:35 AM	#64
sicksti1 Scooby Newbie Member#: 161816 Join Date: Oct 2007 Chapter/Region: MWSOC Location: chicago Vehicle: 2006 sti 35r beast 10.12@139	Deconstruction has begun! My car has been Jenny craiged and the fuel system is being gone through. I will post pics as soon as I have a chance. I hope junior has his sack strapped on nice and tight!!!

11-15-2010, 05:12 AM	#65
KP Scooby Guru Member#: 147637 Join Date: Apr 2007 Chapter/Region: International Location: PM SkimSTI for FREEEEEEEEEEEEE Vehicle: HJ's Ask Hobbs. He knows.	Nines!

11-17-2010, 02:46 PM	#67
Csquared33 Scooby Specialist Member#: 198053 Join Date: Dec 2008 Chapter/Region: Tri-State Location: Danbury, CT Vehicle: 01.5 biturbo	seriously clean engine bay. whats the volume of your catch can?

12-01-2010, 11:51 AM	#70
jnorth85 NASIOC Supporter Member#: 76785 Join Date: Dec 2004 Chapter/Region: MWSOC Location: DSM iowa Vehicle: 2000 RSTi Coupe SRP	Dont know why I didnt see this until now, but congrats Eddie!!

12-02-2010, 12:33 AM	#72
xdrian Scooby Specialist Member#: 104200 Join Date: Jan 2006 Chapter/Region: Tri-State Location: Metuchen NJ Vehicle: 828 WHP BUGEYE Street Proven Performance	good lookin car right there!