I have an N/A manifold going on some jdm big port heads and my avcs hits the top feed injectors fuel rails. I've managed to cut and lower the avcs bracket but now the connector is not clearing. I already have 8mm phenolic gaskets with oem gaskets top and button. Easy fix get thicker gaskets but I don't know anyone that has any thicker them 8mm phenolic gaskets. I was thinking a making a extention and mount them sideways or perhaps a little cambered however the style solenoid I'm unsure will transfer fluid since inside it a small hole that it comes out and the solenoid might not make a complete transfer of flow. If you've seen and examined you'll know what I'm talking about. Also tossing the idea of turning just the plastic part and rotating the connector but unsure if possible. It's just the connecting head that doesn't clear, perhaps cut and create another extended connection. Scarey but it would work I just don't got another set to toy with. Thicker spacers would really be the easy way anyone know where to but some. Thanks for listening to me gripe.