NF Performance's Project Katana STi 11.6 @ 119mph MAP 20g

Nuke209 · 10-09-2011, 10:40 PM

Event: Cedar Falls Raceway Midnight Mania
Location: Cedar Falls, Iowa
Ambient Temp: 60*
Elevation: 850

Car: 2005 STi
Tuner: Nuke
Dyno Info: Streets
Peak HP at RPM: 300+
Peak Torque at RPM: 300+
Baseline hp/tq for a stock on same dyno: 200+WHP
Target Boost: 25PSI
Target AFR: 11ish
Fuel: E85
Engine/Power Modifications:

Drop in CP Pistons
Lightly ported intake ports
FMIC w/SRI
Topfeed conversion, 1200cc Five-O
Walbro 255lph
Stock headers with uppipe/ewg 38mm
MAPerformance's billet 20g
Full TBE
Grimmspeed MBC

NF's Project Katana 2005 STI MAP 20G @ Cedar Falls Raceway 10/08/2011 - YouTube

* Registered users of the site do not see these ads.

2barsti · 10-10-2011, 06:49 AM

Nice!

Scooby921 · 10-10-2011, 08:22 AM

Is this your car or a shop car?

stretchedk7 · 10-10-2011, 08:51 AM

very nice driving

xluben · 10-10-2011, 09:58 AM

Great driving! My car wishes it could do this

I hope I can drive like you someday!

FuJi K · 10-10-2011, 12:05 PM

This is one of our shop cars.
He's come a long way. He's got them shifts down!!! I am really impressed!

Super PUNCH!!!

maperformance · 10-10-2011, 12:25 PM

Great work guys! Thanks for putting that turbo through the ringer for us

Nuke209 · 10-10-2011, 12:47 PM

Quote:

Originally Posted by maperformance

Great work guys! Thanks for putting that turbo through the ringer for us

Let me work it out with a good friend. He should be able to get it closer to my goal

John...I'm calling you out!

Scooby921 · 10-10-2011, 01:51 PM

Quote:

Originally Posted by FuJi K

This is one of our shop cars.
He's come a long way. He's got them shifts down!!! I am really impressed!

Super PUNCH!!!

If you guys want to advertise and post result from "shop" cars you need to have a NASIOC Vendor account. Everyone is allowed to post their own car. Only paying vendors are allowed to post shop cars and customer cars.

PM Matt A or email him at matt@nasioc.com regarding a vendor account.

Sorry, but those are the rules.

ILikeBeans · 10-10-2011, 02:20 PM

Quote:

Originally Posted by Nuke209

John...I'm calling you out!

I hear ya cluckin big chicken!

Nuke209 · 10-10-2011, 04:21 PM

Quote:

Originally Posted by Scooby921

If you guys want to advertise and post result from "shop" cars you need to have a NASIOC Vendor account. Everyone is allowed to post their own car. Only paying vendors are allowed to post shop cars and customer cars.

PM Matt A or email him at matt@nasioc.com regarding a vendor account.

Sorry, but those are the rules.

Will do, thanks

Exec809657 · 10-10-2011, 04:49 PM

more like 400+whp/tq
great run, took me around 400whp for 11.4-11.7, and 450ish (real #'s were inflated BY MY OLD TUNER so I won't repeat) for 11.2-11.4 (24,27psi maps on a rotated 30r sti)

what is your injector duty cycle running? I'm surprised you only have 1200's/255, my 1100's/300 are really holding me back on power already maxed @20psi e85 (above times were on c16) , did you rasie you fuel pressure or something (aftermarket fuel pressure reg if so)

Quote:

Originally Posted by Nuke209

Peak HP at RPM: 300+
Peak Torque at RPM: 300+
Baseline hp/tq for a stock on same dyno: 200+WHP
Target Boost: 25PSI
Target AFR: 11ish
Fuel: E85

Nuke209 · 10-10-2011, 05:15 PM

Quote:

Originally Posted by Exec809657

more like 400+whp/tq
great run, took me around 400whp for 11.4-11.7, and 450ish (real #'s were inflated so I won't repeat) for 11.2-11.4 (24,27psi maps on a rotated 30r sti)

what is your injector duty cycle running? I'm surprised you only have 1200's/255, my 1100's/300 are really holding me back on power already maxed @20psi e85 (above times were on c16) , did you rasie you fuel pressure or something (aftermarket fuel pressure reg if so)

xluben's 20g xt-r used the exact same 1200cc and same walbro and we got up to 80% only. So I'll assume that this is about the same also.

As for the #'s

, we quickly tossed this turbo on and tuned it on the road. No numbers, so i'll just say 300+/300+

BTW, stock fuel pressure and all that stuff. Nothing special.

boost_556 · 10-10-2011, 06:37 PM

i was looking at this turbo i am running an FP18g making 350whp, i wanna break the 400whp but my car is a wrx 2004 with drop in internals ej205 does anyone have any idea if this would be possible on my 2.0?

bilt2run · 10-11-2011, 07:52 AM

nice results..do you know the race weight

msp05sti · 10-11-2011, 11:24 AM

Quote:

Originally Posted by bilt2run

nice results..do you know the race weight

It has full stock(factory) interior. Nothing was removed for weight reduction, so its stock weight plus 165lbs driver.

dwx · 10-11-2011, 11:29 AM

When do you see full boost on this turbo in 3rd gear?

Nuke209 · 10-11-2011, 12:54 PM

Close this

Owner post:
http://forums.nasioc.com/forums/show...php?p=35339717

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NF Performance's Speeding Bullet STi - 10.63 @ 133mph	Nuke209	Proven Power Bragging	50	05-01-2012 10:17 AM
General's stock internal 2.0 runs 11.75 @ 119mph on Holset HE351 (VIDEO) - 4800ft	GeneralTJI	Proven Power Bragging	48	11-21-2009 01:12 AM
11.5@119mph 2006 WRX	Paintballguy	Proven Power Bragging	118	05-12-2007 11:16 PM
11.8 @119mph STI in Puerto Rico	Gadiel	Proven Power Bragging	37	05-28-2005 12:56 AM
04 2.0ltr STI 11.93 @ 119mph	tino	Proven Power Bragging	30	12-22-2004 04:54 AM

10-10-2011, 06:49 AM	#2
2barsti Scooby Newbie Member#: 210644 Join Date: May 2009 Chapter/Region: MWSOC Location: Blaine, MN	Nice!

10-10-2011, 08:22 AM	#3
Scooby921 Thanks Sir Alex! Moderator Member#: 88606 Join Date: Jun 2005 Chapter/Region: MWSOC Location: Clarkston Vehicle: 2011 GMC Sierra 1990 Miata	Is this your car or a shop car?

10-10-2011, 08:51 AM	#4
stretchedk7 Scooby Guru Member#: 170602 Join Date: Jan 2008 Location: j-ville fl Vehicle: 06 Wrx 6Spd TSBorg Warner S400-Aem-2200s	very nice driving

10-10-2011, 09:58 AM	#5
xluben NASIOC Supporter Member#: 261612 Join Date: Oct 2010 Location: Minneapolis, MN Vehicle: 2011 WRX 5 Door NF Performance Stage 1	Great driving! My car wishes it could do this I hope I can drive like you someday!

10-10-2011, 12:05 PM	#6
FuJi K Scooby Guru Member#: 3687 Join Date: Jan 2001 Chapter/Region: MWSOC Location: St. Paul, MN Vehicle: MY99 GF4 JDM 6spd NF Performance	This is one of our shop cars. He's come a long way. He's got them shifts down!!! I am really impressed! Super PUNCH!!!

10-10-2011, 12:25 PM	#7
maperformance NASIOC Vendor Member#: 141043 Join Date: Feb 2007 Chapter/Region: MWSOC Location: Plymouth, MN Vehicle: 2004 FXT Silver	Great work guys! Thanks for putting that turbo through the ringer for us

10-10-2011, 06:37 PM	#14
boost_556 Scooby Newbie Member#: 176536 Join Date: Apr 2008 Location: Jamaica, NY Vehicle: 2004 wrx blue	i was looking at this turbo i am running an FP18g making 350whp, i wanna break the 400whp but my car is a wrx 2004 with drop in internals ej205 does anyone have any idea if this would be possible on my 2.0?

10-11-2011, 07:52 AM	#15
bilt2run Scooby Newbie Member#: 134211 Join Date: Dec 2006 Location: LONG ISLAND	nice results..do you know the race weight

10-11-2011, 11:29 AM	#17
dwx Scooby Guru Member#: 8343 Join Date: Jul 2001 Chapter/Region: MWSOC Location: Atlanta, GA Vehicle: 2005 2012 Jeep 2013 DGM BRZ	When do you see full boost on this turbo in 3rd gear?

10-11-2011, 12:54 PM	#18
Nuke209 Scooby Specialist Member#: 108089 Join Date: Feb 2006 Chapter/Region: MWSOC Location: Minnesota Vehicle: 2003 WRX NF Performance	Close this Owner post: http://forums.nasioc.com/forums/show...php?p=35339717