Epic Engineering '09 WRX Spring Install - Page 37

SWP n Gold · 06-21-2012, 09:52 AM

^ Very nice. I like when people actually get a wide tire for their wide wheels.

* Registered users of the site do not see these ads.

BigRob74 · 06-23-2012, 03:19 PM

im installing these next weekend, and epic has told me i do not need a spring compressor to install. did anyone use a spring compressor? i was under the impression that the spring needed to be compressed so it doesnt kill you when you take off the strut mount..lol

EPIC Engineering · 06-24-2012, 04:09 PM

Sorry, I said that you "can" install them without a spring compression. There is pre-tension on this setup and improper disassembly can cause serious damage to yourself and the components.

If you do not know what you are doing. I will have to suggest you take it to a trained Subaru technician.

- Dan

dangyo · 06-28-2012, 12:57 AM

Finally have my springs on and definitely worth it. Perfect drop to keeping it functional for daily driving. Goes over bumps like stock and handles definitely better.

EPIC Engineering · 06-28-2012, 06:19 PM

Great to hear! I am glad you are happy with them!

BigRob74 · 06-28-2012, 07:03 PM

mine just came today, only 2 bumpstops, i believe that correct, but do i use them for the fronts or rears?

Cwrx2011 · 06-28-2012, 10:41 PM

Hey do these springs make the car sit level or do they make the back lower then the front? I'm interested in buying springs soon and want my car to sit level

SWP n Gold · 06-29-2012, 09:42 AM

Quote:

Originally Posted by BigRob74

mine just came today, only 2 bumpstops, i believe that correct, but do i use them for the fronts or rears?

Only two bumpstops is correct. They're for the rear.

Quote:

Originally Posted by Cwrx2011

Hey do these springs make the car sit level or do they make the back lower then the front? I'm interested in buying springs soon and want my car to sit level

It makes the wheelgap even front and back; gives the car a little more rake.

WRXinpa · 07-02-2012, 10:15 PM

I put mine on over the weekend. I DEFINITELY NEEDED a spring compressor to get them on. Unless you have a 400 lb friend, just get a rental spring compressor set from Pep Boys for free. That's right, free!

There were only rear bumpstops, like the above poster had asked. Re-use the fronts. The stance is obviously better and the car actually rolls less than before, which is an added bonus. If I can get 30k miles or so on the stock struts, I'd be thrilled. Although, I may end up putting Koni's in before then. Good job Epic Engineering!

BTW - I'm not ashamed to say this took my capable self and friend a full day with 2 home depot and pep boys runs for spring compressors and a replacement tophhat bolt/nut and endlink bolt/nut. The tophat bolt sheared off way too easily, had to drill it out. The endlink bolt stripped and we had to cut it off since the nut wouldn't back out.

WRXinpa · 07-02-2012, 10:31 PM

Here is a really poor picture of the stance. Car was mid-wax and detail. So far, so good.

Dan - How soon should I get an alignment with the new springs on stock struts?

SWP n Gold · 07-03-2012, 09:33 AM

Quote:

Originally Posted by WRXinpa

Here is a really poor picture of the stance. Car was mid-wax and detail. So far, so good.

Dan - How soon should I get an alignment with the new springs on stock struts?

Looks good. I installed my springs/wheels/tires and did an alignment all at the same time and I never had uneven tire wear, but if you're really worried about it, I would wait a week.

WRXinpa · 07-08-2012, 10:10 PM

Quote:

Originally Posted by SWP n Gold

Looks good. I installed my springs/wheels/tires and did an alignment all at the same time and I never had uneven tire wear, but if you're really worried about it, I would wait a week.

What were your specs if you don't mind sharing?

SWP n Gold · 07-09-2012, 10:45 AM

Quote:

Originally Posted by WRXinpa

What were your specs if you don't mind sharing?

Unfortunately, I didn't request a printout so I actually don't know.

Mike 01Hawk · 07-09-2012, 11:36 AM

My before/after pics on a 2011 with Epic Springs

This is how it shoulda come from the factory IMO.

Before

After

Before

After

Before

After

WRXinpa · 07-09-2012, 03:30 PM

^^ Nice! My springs settled after a couple hundred miles. The stance is nice and even and definitely a bit lower than when they first went on. On stock struts? Getting an alignment?

Mike 01Hawk · 07-09-2012, 04:21 PM

Quote:

Originally Posted by WRXinpa

On stock struts? Getting an alignment?

Koni Inserts
Whiteline 24/22 sways

Maxed the chamber bolts for neg chamber. Still need to get my toe fixed. I'm just lazy. Plus the quicker my tires wear out the quicker I can upgrade to 18s

SWP n Gold · 07-10-2012, 09:34 AM

Quote:

Originally Posted by Mike 01Hawk

Koni Inserts
Whiteline 24/22 sways

Maxed the chamber bolts for neg chamber. Still need to get my toe fixed. I'm just lazy. Plus the quicker my tires wear out the quicker I can upgrade to 18s

How's the ride with the Konis and what do you have yours set at? I've had the Epic springs for a little over 2 years and I'm picking up Konis in a couple months.

Mike 01Hawk · 07-10-2012, 11:28 AM

Set at half firm and it's fine for me. I had it at full firm for a while and the wife complained it was bouncy, but was still very DD'able IMO.

I haven't tried Full Soft.

Since I had plenty of run out and no cars around, I took an 4 lane "T" way too hot at 90 degrees this morning (~50ish). It pushed but I got some on-axis rotation, pretty groovy

EPIC Engineering · 07-12-2012, 02:29 PM

More pics of the sedan Mike!

- Dan

EPIC Engineering · 08-02-2012, 03:17 PM

Looking for a customer with a BRZ that would be interested in a free set of springs.
We do not need your vehicle. Just feedback.

- Dan

WRXinpa · 08-02-2012, 03:26 PM

Got a few more shots after a month of so of riding on the springs. So far, no complaints. Its really tough to get the proper lighting for pictures so that the wheel wells aren't covered by shadows, but you get the idea.

Dan - Do you sell Koni inserts?

WRXinpa · 08-02-2012, 03:30 PM

BTW - I haven't gotten an alignment yet. I'm sure its a bit out of whack, but the car tracks straight as an arrow and the tires show no signs of uneven wear. Plus, the fact that I'm selling and buying a house doesn't help cash flow

SWP n Gold · 08-02-2012, 05:04 PM

Quote:

Originally Posted by WRXinpa

Got a few more shots after a month of so of riding on the springs. So far, no complaints. Its really tough to get the proper lighting for pictures so that the wheel wells aren't covered by shadows, but you get the idea.

Dan - Do you sell Koni inserts?

Looks good! And a lower offset would help get rid of those shadows.

Also, I've been PM'ing some vendors for quotes on Konis since I'm in the market as well. I found 2 vendors that are offering some pretty low prices on them. PM me if you want to know which ones.

azscooby · 08-05-2012, 09:31 PM

I can't remember if I ever posted my review of these springs...and I'm bored so I'll do it again.

Anyone on the fence about getting these springs.....DO IT!

I went back and forth about putting lowering springs on my car for almost four years. Even after I bought the springs I waited six months to install them.

I was really concerned that the ride quality was going to really suffer, and I'm old so this was important.

Finally got them installed and I could not be happier! I should have done these years ago.

The ride height is perfect and the ride is hardly a compromise from stock, a little stiffer, but not enough to make an appreciable difference.

Very happy with these springs.

Good job EE!

Ruzty1311 · 08-08-2012, 04:45 PM

I can't wait to get mine!!

06-24-2012, 04:09 PM	#903
EPIC Engineering NASIOC Manufacturer Vendor Sales Rating: (22) Member#: 191347 Join Date: Oct 2008 Chapter/Region: SCIC Location: Irvine, CA	Sorry, I said that you "can" install them without a spring compression. There is pre-tension on this setup and improper disassembly can cause serious damage to yourself and the components. If you do not know what you are doing. I will have to suggest you take it to a trained Subaru technician. - Dan __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. “The difference is in the details.” To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

06-28-2012, 06:19 PM	#905
EPIC Engineering NASIOC Manufacturer Vendor Sales Rating: (22) Member#: 191347 Join Date: Oct 2008 Chapter/Region: SCIC Location: Irvine, CA	Great to hear! I am glad you are happy with them! __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. “The difference is in the details.” To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-02-2012, 10:15 PM	#909
WRXinpa Scooby Newbie Member Sales Rating: (1) Member#: 306708 Join Date: Jan 2012 Chapter/Region: MAIC Location: Philly Vehicle: 2012 WRX Hatch SWP Mods Underway	I put mine on over the weekend. I DEFINITELY NEEDED a spring compressor to get them on. Unless you have a 400 lb friend, just get a rental spring compressor set from Pep Boys for free. That's right, free! There were only rear bumpstops, like the above poster had asked. Re-use the fronts. The stance is obviously better and the car actually rolls less than before, which is an added bonus. If I can get 30k miles or so on the stock struts, I'd be thrilled. Although, I may end up putting Koni's in before then. Good job Epic Engineering! BTW - I'm not ashamed to say this took my capable self and friend a full day with 2 home depot and pep boys runs for spring compressors and a replacement tophhat bolt/nut and endlink bolt/nut. The tophat bolt sheared off way too easily, had to drill it out. The endlink bolt stripped and we had to cut it off since the nut wouldn't back out. Last edited by WRXinpa; 07-02-2012 at 10:36 PM.

07-12-2012, 02:29 PM	#919
EPIC Engineering NASIOC Manufacturer Vendor Sales Rating: (22) Member#: 191347 Join Date: Oct 2008 Chapter/Region: SCIC Location: Irvine, CA	More pics of the sedan Mike! - Dan __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. “The difference is in the details.” To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

08-02-2012, 03:17 PM	#920
EPIC Engineering NASIOC Manufacturer Vendor Sales Rating: (22) Member#: 191347 Join Date: Oct 2008 Chapter/Region: SCIC Location: Irvine, CA	Looking for a customer with a BRZ that would be interested in a free set of springs. We do not need your vehicle. Just feedback. - Dan __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. “The difference is in the details.” To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

06-21-2012, 09:52 AM	#901
SWP n Gold Scooby Guru Member Sales Rating: (1) Member#: 110783 Join Date: Mar 2006 Chapter/Region: Tri-State Location: Bethel, CT Vehicle: 2010 WRX Satin White Pearl	^ Very nice. I like when people actually get a wide tire for their wide wheels. * Registered users of the site do not see these ads.

06-23-2012, 03:19 PM	#902
BigRob74 Scooby Specialist Member Sales Rating: (4) Member#: 305107 Join Date: Dec 2011 Chapter/Region: Tri-State Location: Long Island, NY Vehicle: 2012 wrx/TP Stage 2 satin white pearl	im installing these next weekend, and epic has told me i do not need a spring compressor to install. did anyone use a spring compressor? i was under the impression that the spring needed to be compressed so it doesnt kill you when you take off the strut mount..lol

06-28-2012, 12:57 AM	#904
dangyo Scooby Newbie Member Sales Rating: (1) Member#: 289786 Join Date: Jul 2011 Chapter/Region: Tri-State Location: South Jersey Vehicle: 2011 WRX Hatch	Finally have my springs on and definitely worth it. Perfect drop to keeping it functional for daily driving. Goes over bumps like stock and handles definitely better.

06-28-2012, 07:03 PM	#906
BigRob74 Scooby Specialist Member Sales Rating: (4) Member#: 305107 Join Date: Dec 2011 Chapter/Region: Tri-State Location: Long Island, NY Vehicle: 2012 wrx/TP Stage 2 satin white pearl	mine just came today, only 2 bumpstops, i believe that correct, but do i use them for the fronts or rears?

06-28-2012, 10:41 PM	#907
Cwrx2011 Scooby Newbie Member Sales Rating: (0) Member#: 324053 Join Date: Jun 2012 Location: San Antonio/ Stone Oak Area Vehicle: 2011 Wrx	Hey do these springs make the car sit level or do they make the back lower then the front? I'm interested in buying springs soon and want my car to sit level

07-02-2012, 10:31 PM	#910
WRXinpa Scooby Newbie Member Sales Rating: (1) Member#: 306708 Join Date: Jan 2012 Chapter/Region: MAIC Location: Philly Vehicle: 2012 WRX Hatch SWP Mods Underway	Here is a really poor picture of the stance. Car was mid-wax and detail. So far, so good. Dan - How soon should I get an alignment with the new springs on stock struts?

07-09-2012, 11:36 AM	#914
Mike 01Hawk Scooby Specialist Member Sales Rating: (3) Member#: 219162 Join Date: Aug 2009 Location: Tulsa Vehicle: 2011 WRX Sedan Base Silver	My before/after pics on a 2011 with Epic Springs This is how it shoulda come from the factory IMO. Before After Before After Before After

07-09-2012, 03:30 PM	#915
WRXinpa Scooby Newbie Member Sales Rating: (1) Member#: 306708 Join Date: Jan 2012 Chapter/Region: MAIC Location: Philly Vehicle: 2012 WRX Hatch SWP Mods Underway	^^ Nice! My springs settled after a couple hundred miles. The stance is nice and even and definitely a bit lower than when they first went on. On stock struts? Getting an alignment?

07-10-2012, 11:28 AM	#918
Mike 01Hawk Scooby Specialist Member Sales Rating: (3) Member#: 219162 Join Date: Aug 2009 Location: Tulsa Vehicle: 2011 WRX Sedan Base Silver	Set at half firm and it's fine for me. I had it at full firm for a while and the wife complained it was bouncy, but was still very DD'able IMO. I haven't tried Full Soft. Since I had plenty of run out and no cars around, I took an 4 lane "T" way too hot at 90 degrees this morning (~50ish). It pushed but I got some on-axis rotation, pretty groovy

08-02-2012, 03:26 PM	#921
WRXinpa Scooby Newbie Member Sales Rating: (1) Member#: 306708 Join Date: Jan 2012 Chapter/Region: MAIC Location: Philly Vehicle: 2012 WRX Hatch SWP Mods Underway	Got a few more shots after a month of so of riding on the springs. So far, no complaints. Its really tough to get the proper lighting for pictures so that the wheel wells aren't covered by shadows, but you get the idea. Dan - Do you sell Koni inserts?

08-02-2012, 03:30 PM	#922
WRXinpa Scooby Newbie Member Sales Rating: (1) Member#: 306708 Join Date: Jan 2012 Chapter/Region: MAIC Location: Philly Vehicle: 2012 WRX Hatch SWP Mods Underway	BTW - I haven't gotten an alignment yet. I'm sure its a bit out of whack, but the car tracks straight as an arrow and the tires show no signs of uneven wear. Plus, the fact that I'm selling and buying a house doesn't help cash flow

08-05-2012, 09:31 PM	#924
azscooby Scooby Specialist Member Sales Rating: (11) Member#: 115297 Join Date: May 2006 Chapter/Region: SWIC Location: Mesa, AZ Vehicle: 2002 ej207 vf34 WRB	I can't remember if I ever posted my review of these springs...and I'm bored so I'll do it again. Anyone on the fence about getting these springs.....DO IT! I went back and forth about putting lowering springs on my car for almost four years. Even after I bought the springs I waited six months to install them. I was really concerned that the ride quality was going to really suffer, and I'm old so this was important. Finally got them installed and I could not be happier! I should have done these years ago. The ride height is perfect and the ride is hardly a compromise from stock, a little stiffer, but not enough to make an appreciable difference. Very happy with these springs. Good job EE!

08-08-2012, 04:45 PM	#925
Ruzty1311 Scooby Newbie Member Sales Rating: (1) Member#: 311911 Join Date: Feb 2012 Chapter/Region: SCIC Location: Apple Valley, Ca (High Desert) Vehicle: 2012 WRX Limited Satin White Pearl	I can't wait to get mine!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wrx spring install instructions?	subwrx23	Newbies & FAQs	12	12-26-2012 09:11 AM
WTB/WTT: Stock '09+ WRX Springs/aftermarket 08+	08WRbX	TXIC Private Classifieds	6	03-15-2010 07:33 PM
EPIC Engineering 08+ STI Springs have arrived! Great deals on StopTech too!	WorldOne	Suspension/Brakes/Handling	21	12-21-2009 01:15 PM
WRX spring install questions	steak	Newbies & FAQs	23	09-30-2003 10:54 AM
WRX Spring install	RALLYT-WRX	Brakes, Steering & Suspension	2	02-26-2002 01:55 PM