CL afr's - Page 2

amalgrover · 07-06-2012, 12:06 PM

if you do a search for a homemade boost leak tester, it will have an exact layout of what needs to be purchased, how to assemble it, and how to actually perform the test.

* Registered users of the site do not see these ads.

wayward167 · 07-06-2012, 04:05 PM

found stuff on 3gwrx......found two lines that while idk if they were leaking they were at least not as tight as i would like.

still didn't hear anything definitive.

amalgrover · 07-06-2012, 04:50 PM

are you 100% stock or do you have some aftermarket parts?

wayward167 · 07-06-2012, 05:26 PM

lol.....almost everything except the turbo and inlet.

ebcs
intake
tbe
uppipe
crosspipe
turbo blanket
tmic
bpv

checked all the intake side stuff that could cause this aside from the inlet itself ripping.

amalgrover · 07-06-2012, 07:44 PM

what intake do you have, what tbe, and who does your tuning?

Cr4ckfi3nd · 07-06-2012, 08:10 PM

Quote:

Originally Posted by wayward167

checked all the intake side stuff that could cause this aside from the inlet itself ripping.

This..... happens more than you might think

wayward167 · 07-06-2012, 09:16 PM

Quote:

Originally Posted by amalgrover

what intake do you have, what tbe, and who does your tuning?

Invidia tbe Cobb SF intake, medamullet

I'm sending him a log tomorrow and we'll see what's up.

wayward167 · 07-06-2012, 09:17 PM

Quote:

Originally Posted by Cr4ckfi3nd

This..... happens more than you might think

Haven't touched prior to today and the car is relatively new.... possible but not likely

07-06-2012, 04:05 PM	#27
wayward167 Scooby Specialist Member#: 253998 Join Date: Aug 2010 Chapter/Region: NWIC Location: Pocatello ID Vehicle: 13 BRZ SWP	found stuff on 3gwrx......found two lines that while idk if they were leaking they were at least not as tight as i would like. still didn't hear anything definitive. Last edited by wayward167; 07-06-2012 at 04:42 PM. Reason: new info

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ignition Timing and AFR's	555	Engine Management & Tuning	2	01-02-2005 04:02 PM
AFR's	hondaeater69	Factory 2.0L Turbo Powertrain	2	10-15-2004 08:06 PM
what are some normal healthy AFR's for a stge 4 wrx?	blackie	Engine Management & Tuning	3	10-01-2004 04:31 PM
Spiraling AFR's when pumping the brakes at idle...	TexRex2002	Engine Management & Tuning	5	06-30-2004 12:57 AM
Crazy AFR's	Big Turkey	Factory 2.0L Turbo Powertrain	9	01-22-2004 12:48 PM

07-06-2012, 12:06 PM	#26
amalgrover Scooby Specialist Member#: 183480 Join Date: Jun 2008 Chapter/Region: South East Location: Valdosta, GA Vehicle: 2011 Audi A3 Quattro 2009 Forester XT	if you do a search for a homemade boost leak tester, it will have an exact layout of what needs to be purchased, how to assemble it, and how to actually perform the test. * Registered users of the site do not see these ads.

07-06-2012, 04:50 PM	#28
amalgrover Scooby Specialist Member#: 183480 Join Date: Jun 2008 Chapter/Region: South East Location: Valdosta, GA Vehicle: 2011 Audi A3 Quattro 2009 Forester XT	are you 100% stock or do you have some aftermarket parts?

07-06-2012, 05:26 PM	#29
wayward167 Scooby Specialist Member#: 253998 Join Date: Aug 2010 Chapter/Region: NWIC Location: Pocatello ID Vehicle: 13 BRZ SWP	lol.....almost everything except the turbo and inlet. ebcs intake tbe uppipe crosspipe turbo blanket tmic bpv checked all the intake side stuff that could cause this aside from the inlet itself ripping.

07-06-2012, 07:44 PM	#30
amalgrover Scooby Specialist Member#: 183480 Join Date: Jun 2008 Chapter/Region: South East Location: Valdosta, GA Vehicle: 2011 Audi A3 Quattro 2009 Forester XT	what intake do you have, what tbe, and who does your tuning?