Rear sway bar fitment question

Boxerscoopy90 · 11-17-2012, 05:32 AM

Guys i have 07 impreza and unfortunately it didnt come with a rear sway bar ( yes it didnt) in my country . so i was asking if i could fit one . I know that i will need endlinks, bushings and brackets any thing else ?
But my question is would i be able to fit it because when i had a look under the car i didnt find that piece that the endlink should be attached to . I know u might not understand me put i'll take a picture to show what iam talking about

* Registered users of the site do not see these ads.

Boxerscoopy90 · 11-17-2012, 05:47 AM

FCmaniac · 11-17-2012, 06:30 AM

I don't see mounting points for the endlinks on the control arms. My guess is that you could swap in WRX or USDM Impreza control arms that have the endlink mounting points. I'd research that first.

The other question is do you have the threaded holes for the sway bar mount brackets?

Dr. Mitsubaru · 11-17-2012, 07:16 AM

Quote:

Originally Posted by FCmaniac

I don't see mounting points for the endlinks on the control arms. My guess is that you could swap in WRX or USDM Impreza control arms that have the endlink mounting points. I'd research that first.

The other question is do you have the threaded holes for the sway bar mount brackets?

For the rear, the endlinks mount on the rear Lateral Arm, so buy some usdm rear lateral arms, or weld on some brackets. Also make sure you do have the threaded 8x1.25 holes for the mounting brackets as stated above.

Boxerscoopy90 · 11-17-2012, 10:46 AM

Thxx guyss . Do u think it would be a good idea to weld it or should i buy 2 new lateral links ?
I'll make sure that i have holes for the upper bracket but if i didnt is there also a solution flr that ?

Boxerscoopy90 · 11-17-2012, 06:45 PM

Also is there any way i could fit it without changing the lateral arms

Boxerscoopy90 · 11-18-2012, 03:40 AM

Any help ?

sc00by4life · 11-18-2012, 03:42 AM

Quote:

Originally Posted by Boxerscoopy90

Thxx guyss . Do u think it would be a good idea to weld it or should i buy 2 new lateral links ?
I'll make sure that i have holes for the upper bracket but if i didnt is there also a solution flr that ?

You need the correct lateral links.

Quote:

Originally Posted by Boxerscoopy90

Also is there any way i could fit it without changing the lateral arms

No.

Quote:

Originally Posted by Boxerscoopy90

Any help ?

there is absolutely no need to bump a thread every hour. it takes time to get responses.

11-17-2012, 05:32 AM	#1
Boxerscoopy90 Scooby Newbie Member#: 309974 Join Date: Feb 2012	Rear sway bar fitment question Guys i have 07 impreza and unfortunately it didnt come with a rear sway bar ( yes it didnt) in my country . so i was asking if i could fit one . I know that i will need endlinks, bushings and brackets any thing else ? But my question is would i be able to fit it because when i had a look under the car i didnt find that piece that the endlink should be attached to . I know u might not understand me put i'll take a picture to show what iam talking about * Registered users of the site do not see these ads.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-17-2012, 05:47 AM	#2
Boxerscoopy90 Scooby Newbie Member#: 309974 Join Date: Feb 2012

11-17-2012, 06:30 AM	#3
FCmaniac Scooby Specialist Member#: 142029 Join Date: Feb 2007 Chapter/Region: Tri-State Location: Lehigh Valley, PA Vehicle: 2013 Fozz 2004 STi, 1991 Miata BRG	I don't see mounting points for the endlinks on the control arms. My guess is that you could swap in WRX or USDM Impreza control arms that have the endlink mounting points. I'd research that first. The other question is do you have the threaded holes for the sway bar mount brackets?

11-17-2012, 10:46 AM	#5
Boxerscoopy90 Scooby Newbie Member#: 309974 Join Date: Feb 2012	Thxx guyss . Do u think it would be a good idea to weld it or should i buy 2 new lateral links ? I'll make sure that i have holes for the upper bracket but if i didnt is there also a solution flr that ?

11-17-2012, 06:45 PM	#6
Boxerscoopy90 Scooby Newbie Member#: 309974 Join Date: Feb 2012	Also is there any way i could fit it without changing the lateral arms

11-18-2012, 03:40 AM	#7
Boxerscoopy90 Scooby Newbie Member#: 309974 Join Date: Feb 2012	Any help ?