07 Wrx, Fp Black, E85, Iwg, Tmic

[Irv Weissmanhowerton]

remembering on rons car when we used some hose clamps or t-bolt clamps on the part where it bends, to stiffen it up to prevent collapsing & keep it open smooth around the bend, that seemed to work pretty well, but yea, I def feel bad for those stock location guys and that kink

* Registered users of the site do not see these ads.

[juanmedina]

FMIC is here

[Slimsti]

Nice, set 4-5 hours aside and install that thing and lets really see what this Fp Black can do.lol

[amalgrover]

well...i doubt juan will turn it up all the way...he's scared his rods will create a MUCH larger crank vent like my ET rods did ...just do it already...we all know that you aren't going to be satisfied with it until you do

[Subian]

Originally Posted by juanmedina

FMIC is here

Do a back to back comparison and see if the FMIC adds any lag and flows more air with that black of yours.

[Slimsti]

on my dom 3 when i switched from a large tmic to my fmic i only added 300rpm of lag. It was basically unnoticable on the street and the power just felt "smoother"? I guess thats how i could explain it.

[Nuke209]

30+ psi or bust

[juanmedina]

Originally Posted by Slimsti

Nice, set 4-5 hours aside and install that thing and lets really see what this Fp Black can do.lol

Thanks

Originally Posted by amalgrover

well...i doubt juan will turn it up all the way...he's scared his rods will create a MUCH larger crank vent like my ET rods did ...just do it already...we all know that you aren't going to be satisfied with it until you do

I cannot turn it up because I am out of injector right now. I don't know when the 2200cc are going to go in. Some day I will turn it up . You guys have to realize that my car weights like 3050lbs with me in it, so it feels like a regular 550-560whp car every time I drive it .

Originally Posted by Subian

Do a back to back comparison and see if the FMIC adds any lag and flows more air with that black of yours.

I will. I am going to use the same map and try to keep all the parameters the same when I do test. I am expecting 250rpm of extra lag but I really hope to gain 10-20whp keeping everything the same. We will see

[juanmedina]

Originally Posted by Nuke209

30+ psi or bust

you just want me blow my engine

[MMY MSL]

Looking forward to the new graphs with the FMIC. Any ETA?

[07wrx84]

Originally Posted by Nuke209

30+ psi or bust

Haha!

[juanmedina]

Originally Posted by MMY MSL

Looking forward to the new graphs with the FMIC. Any ETA?

Maybe this weekend.

The FMIC came with a catch can/coolant overflow tank. I am going to relocate my coolant overflow tank and use the perrin tank as a catch can.

How should I route the lines?

[Nuke209]

Originally Posted by juanmedina

you just want me blow my engine

oh c'mon. i just want to see your car make power!...

[Phatron]

Originally Posted by juanmedina

I am going to use the same map and try to keep all the parameters the same when I do test.

you can keep the parameters the same (boost, timing, afr), but you're not going to accomplish that using the same map.

If you put a fmic on a tmic map and just go do a wot pull, your boost isnt going to be where it was and your AFR is going to be 0.5-1.5 rich around peak boost.

for the catch cans, the easiest way is just to run new lines from the heads straight to the can....which is why people utilize 2 cans. so you dont have 10 ft of lines going from each head to one single can.

the problem doing this with the stock location turbo inlet is that you need to start plugging off the big ass holes.....

[juanmedina]

Originally Posted by Phatron

you can keep the parameters the same (boost, timing, afr), but you're not going to accomplish that using the same map.

If you put a fmic on a tmic map and just go do a wot pull, your boost isnt going to be where it was and your AFR is going to be 0.5-1.5 rich around peak boost.

Well is going to have to be adjust.... I send you the MAF tab later today.

[GT35RHybrid]

For what it's worth I was boosting 30-31 psi on my last build. LOL

[Paul]

Ron is tuning the car?....I thought you were a tuner now Juan?

[juanmedina]

Originally Posted by GT35RHybrid

For what it's worth I was boosting 30-31 psi on my last build. LOL

According to you graph you made 527whp at 28psi and trapped 136mph . Mine should be somewhat lighter than your, we will see what I trap.

[juanmedina]

Originally Posted by Paul

Ron is tuning the car?....I thought you were a tuner now Juan?

lol I am not a tuner, I am an ethusiast.

Ron is tuning the car because that was the deal between FiveO and Phatbotti. I know I am in great hands

[juanmedina]

Originally Posted by juanmedina

Maybe this weekend.

The FMIC came with a catch can/coolant overflow tank. I am going to relocate my coolant overflow tank and use the perrin tank as a catch can.

How should I route the lines?

So, output to what numbered nipple and input to what numbered nipple?

[Phatron]

man, you really need to find your leak before you start doing all this stuff.

we know your car has a leak right now. but if you go and put on teh fmic and 20ft of hoses, its going to make it much more of a pita to find it.

[juanmedina]

almost done...

[wrxsubiemod]

Looks like a power gain to me

[Phatron]

dual intercoolers ftw

[fastblueufo]

Originally Posted by juanmedina

So, output to what numbered nipple and input to what numbered nipple?

Do what Ron said and just plug the holes. Run head vents to one catch can and run the two case breathers to another catch can. Then vent both to atmosphere using good mesh filters. That's the best way unless your motor has a lot of access crank case pressure. In that case your mesh filters will be oily all the time. Vent to atmoshere only if your speed density. If your on maf then you need to run back to turbo inlet.