|12-30-2004, 05:14 PM||#1|
Join Date: Sep 2004
Location: NW Chicago BurbsVehicle:
World Rally Blue
Interior Color Change Tutorial: Gauge Cluster
Gauge Cluster Color Change Tutorial (Without Removing Needles)
What you need:
Drop down steering column to lowest position:
Unscrew the two philips screws holding the black trim around the gauges(red circled), then pull the surround towards you to release the two clips at the bottom(blue circled):
Slide out the surround by the side of the steering wheel as shown below:
There are 3 philips screws to be removed (circled red)
Pull the cluster towards you, then push the top of it away from you so it's laying on its back, then slide it towards you, if you have a boost gauge, you might need to push the soft rubber surround down to get the cluster out, dont be scared.
Now remove the three green clips in the back of the cluster, try not to cross them over or mix them up, but they should stay in place well.
Last edited by Trunk_Monkey; 03-25-2005 at 09:39 AM.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Interior Color Change Tutorial: Radio and HVAC||Trunk_Monkey||Interior & Exterior Modification||248||10-29-2013 11:47 AM|
|Interior Color Change Tutorial: Key Ring||Trunk_Monkey||Electrical & Lighting||70||10-21-2013 05:41 PM|
|Interior Color Change Tutorial: OEM Boost Gauge||Trunk_Monkey||Electrical & Lighting||62||05-16-2013 07:02 PM|
|Interior color change tutorial: Clock||WejR20X||Electrical & Lighting||9||11-07-2006 02:52 AM|
|changing Sti gauge cluster color||Basshead||STi Forum Archive||7||09-12-2003 03:08 PM|