|
|
|
|
Thread Tools | Display Modes |
10-04-2010, 03:38 PM | #1 |
Scooby Specialist
Member Sales Rating: (29)
Member#: 180640
Join Date: May 2008
Chapter/Region:
E. Canada
Location: Montreal, Canada
Vehicle:2000 Drag RSTi 8.96 @ 163 |
Vishnu Rotated Turbo Downpipe/Up-pipe + Tial 38mm External wastegate
Well, it's time to do some upgrading. I have had this setup for the last few years and it has always worked great for me.
I am upgrading to a bigger turbo and have come to the conclusion that a 44mm wastegate is a better fit for me at this point. I was having surge issues at about 40psi on my old turbo. Turned the boost down and it was fine. I have just reached the limitations of a 38mm. I am currently in the process of building a tubular exhaust manifold and full V-band Dp/Up pipe, so I don't need this setup anymore. Open Dump FTW. Thing is though, I could use this setup on my new build, but it was custom made by Vishnu Performance for their Stage 3 kit and instead of hacking it up to get a 44mm wastegate to fit, I rather it go to a fellow turbo 2.5rser. Few specs: - Complete rotated setup - I had two turbos on this DP/UP/wastegate. A GT30R and PTE6262. Both of them fit perfectly - It is a T3 4 Bolt - Fits a .63ar or .82ar turbo exhaust housing - 2.5" SS Up-pipe - 3" SS downpipe w/v-band clamp connection - Everything covered with DEI exhaust wrap and spray - Tial 38mm Wastegate w/fresh rebuild. Dump tube merges back into exhaust. Sorry, no Open dump here. - Fits the stock 2.5rs crossmember. No need to go out and buy a turbo crossmember. - Three threaded spots on the DP to hook up your wideband or O2 sensors. - Direct bolt-on except for the other end of the DP. It uses a 3" V-band connection to attach to the rest of the exhaust system. - Uses the oem exhaust manifold. I used the oem manifold for a while until I moved to a Borla header. But any 2.5rs manifold will work. (see pics) You get: - Vishnu 3" rotated downpipe - Vishnu ss 2.5" up-pipe - Tial 38mm wastegate Also available: - 3" vband testpipe - high flow cat vband - 3" axle back vband - magnaflow muffler with vband connections Trying to sell everything as a packaged deal. sold!!! Got questions? PM me or AIM: Benjamindmarcus Few new pictures: OLD PICTURES:
* Registered users of the site do not see these ads.
Last edited by mtcs; 10-08-2010 at 01:50 AM. |
10-04-2010, 03:42 PM | #2 |
Scooby Specialist
Member Sales Rating: (29)
Member#: 180640
Join Date: May 2008
Chapter/Region:
E. Canada
Location: Montreal, Canada
Vehicle:2000 Drag RSTi 8.96 @ 163 |
Btw...
I am willing to include the rest of the exhaust if the price is right... After the DP, I have a full 3" to the testpipe to magnaflow mufler with all V-band clamps. Test pipe is held in place with V-band connections and the aftermarket cat+O2 sensor can be swapped in in less than 2 minutes. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Tial 38mm external wastegate... | 06_Silver_LGT | Engine/Power/Exhaust | 8 | 11-30-2007 03:50 AM |
TiAL 38mm External Wastegate (NEW) | inphinity1 | Engine/Power/Exhaust | 2 | 11-25-2007 12:43 PM |
Garrett T3/T04E, TiAL 38mm External Wastegate, UR 3" Downpipe & More. | inphinity1 | Engine/Power/Exhaust | 67 | 09-13-2007 04:28 PM |
TurboXS downpipe + UR up-pipe/Tial 38mm EWG (will it fit) | StiPete | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 16 | 05-22-2006 05:29 PM |
FS: NY Tial 38MM External Wastegate | 9vapors | Tri-State Area Private Classifieds | 2 | 05-19-2006 08:46 AM |