|
|
|
|
Thread Tools | Display Modes |
02-25-2009, 12:05 AM | #1 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
TPG Tuning and the SBR 20G
Well, one thing I have to say about Nate and James is that they are EXTREMELY hard workers; furthermore, they're good! They knew that I had tight restrictions due to work and the lo0ng distance I had to drive to get there. So they wanted this to be a one day job, and thats exactly what we got with 5 hours to spare.
I came in with my Slowboy Racing 20G (7cm) turbo, FMIC, FIC 725cc fuel injectors, and a fuel pump. After getting all of that stuff put on, Nate met me over at Wyotech (he's a performance instructor there) to put it on the dyno. Since I still have my stock clutch Nate only wanted to smooth out the AFRs and leave the boost low (15psi). He told me that if I eat all my brocolli and get a decent clutch, then he'll put it back on the dyno and start to work on the timing, so stay tuned! (I made a joke ) This is what went down. This was the offender. I had my doubts, but after hitting the dyno, they were quietly put at ease. For anybody in the north eastern US that wants to tune a car, this is the guy i would reccomend. He had some of his students helping with the dyno (kinda like an after school project for them) and when serious enthusiast and well educated mechanics have this kinda respect for somebody, it speaks volumes. He is just now getting his new shop up and running, but I predict that we (not just Sube, but import community) are going to be hearing from Nate and his crew alot in the future.
* Registered users of the site do not see these ads.
Last edited by Five-seveN; 02-25-2009 at 09:10 PM. |
02-25-2009, 12:06 AM | #2 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
And please, remember, that this is strait boost (low, 15psi), and no changes to timing YET. I just don't want somebody thinking that this is a crappy tune.
But does anybody want to take a stab at how much I WILL make with timing? Last edited by Five-seveN; 02-25-2009 at 09:08 PM. Reason: fooooooooooool |
02-25-2009, 12:26 AM | #3 |
Scooby Newbie
Member#: 78865
Join Date: Jan 2005
Vehicle:05 WRX STi, 90 GSX 10.05 @ 145.5 |
Thanks for the kind words Brett, its was definetly a fun day!
There is more room to go with the setup, but we wanted to leave it a little conservative because of the clutch and drivetrain. This was just 15psi on spring pressure no boost control. I'd like to have the car back in a few weeks after the clutch install, 350-360whp shouldn't be a problem! Nate TPG Tuning |
02-25-2009, 12:36 AM | #4 |
Scooby Specialist
Member#: 171773
Join Date: Feb 2008
Chapter/Region:
South East
Location: tampa, fl
Vehicle:04 wrx sti jbp dom 3 xtr w meth! |
Wow that's awesome. Yea I would say about 350 whp.
|
02-25-2009, 02:37 AM | #5 |
Scooby Guru
Member#: 105814
Join Date: Jan 2006
Chapter/Region:
NWIC
|
Not bad numbers for low boost.
Looks great. |
02-25-2009, 10:26 AM | #6 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
Like i said in my first post, after looking at the turbo, i was very skeptical about this 20G. All the guys working the dyno were pretty certain that it would see 350 once i get a better clutch and the timing gets adjusted.
.....now where's that E85??? |
02-25-2009, 11:06 AM | #7 |
Scooby Guru
Member#: 56203
Join Date: Feb 2004
Chapter/Region:
Tri-State
Location: south nj
Vehicle:00 RSTI Coupe Twin Scroll 2.5XTR EJ207 |
makes decent power for amount of boost.
whats up with the dip from 3200-4200? |
02-25-2009, 11:19 AM | #8 | |
Scooby Guru
Member#: 36033
Join Date: Apr 2003
Chapter/Region:
SCIC
Location: Tuning Lab
Vehicle:CEO PhatBottiTuning 2006 STi GTX3582 + Meth |
Quote:
But your statements in the first post lead me to believe that he left your timing stock....is that true? If so, he will need to remove timing, not add it when he ups the boost......especially at higher rpm. For a 20g at 22psi tapering to 20psi.....running 12* of timing at peak load up to 20* at redline.....i'll give you 91 octane 300-320whp - mustang/dd 340-360whp - dynojet 93 octane 320-340whp - mustang/dd 360-380whp - dynojet |
|
02-25-2009, 11:21 AM | #9 |
Scooby Newbie
Member#: 176760
Join Date: Apr 2008
Chapter/Region:
MAIC
Location: South Central PA
Vehicle:2004 WRX 99 Vette 09 CBR600RR |
|
02-25-2009, 01:12 PM | #10 | |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
Quote:
My boost comes up to about 12psi at 3K rpm, then it settles, and then it starts to gain boost again, about 15psi. I can attribute this to the lack of boost controller atm, but this saturday we're gonna hook something up to clean up that and the boost at mid throttle. |
|
02-25-2009, 01:18 PM | #11 |
Scooby Newbie
Member#: 203935
Join Date: Feb 2009
|
Nate is a great dude!
|
02-25-2009, 03:59 PM | #12 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
I totally agree! And the company he keeps (i.e. the guys working for him) are great guys too! James sat, cutting on my bumper, for hours to get it just right, and once i get the pics up, you'll understand. This car looks like it just has a factory mounted FMIC. My hat is off to these guys. |
02-25-2009, 06:37 PM | #13 |
Former Vendor
Member#: 33839
Join Date: Mar 2003
Chapter/Region:
South East
Location: Destin Fl.
Vehicle:2002 WRX Black |
|
02-25-2009, 07:00 PM | #14 |
Scooby Newbie
Member#: 204066
Join Date: Feb 2009
|
Nice dude!
|
02-25-2009, 07:49 PM | #15 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
LOL Mike!
BTW, that's a nice little snail you have there, thanks! |
02-25-2009, 08:59 PM | #16 | ||
Scooby Specialist
Member#: 4498
Join Date: Feb 2001
Chapter/Region:
NWIC
Location: Portland, Oregon
Vehicle:WRX H6-3.0 Turbo www.surgelinetuning.com |
Quote:
Quote:
Your comment about 'advancing the timing' is concerning. I can only assume that it is a comment that you are making, not something your tuner actually said. Timing is not something you turn up like a wick. For a given condition there is an ideal timing that delivers the most torque. Part of tuning is identifing that value, and determining if the car can safely achieve it. I would also assume that when the car was put on the dyno the timing was changed. 16psi with a 20G is much different then 16psi from the stock turbo. These are load based cars, so timing based on load would already be different, but that doesn't correlate well to the actual boost level. Jeff |
||
02-25-2009, 09:07 PM | #17 | |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
Quote:
Well, first off, that's why i have a tuner. Cause I don't understand it, hell, i can hardly speak it, only thing i can really do is drive it. And not to be rude, but you assumed and failed to read. I already stated like 10 times that the timing was not even touched. The boost is also being held down to 15psi until a new clutch goes on. kthnxbi |
|
02-25-2009, 09:07 PM | #18 |
Scooby Specialist
Member#: 132130
Join Date: Nov 2006
Chapter/Region:
TXIC
Location: Austin, Texas
Vehicle:2002 Ford F-150 Graphite Gray |
i wouldnt let anyone from west virgina tune my car, let alone touch it
maybe he meant adding timing after they put whiskey in the gas tank to improve the octane numbers..so they could hit 88 mph and jump start the flux capacitor if you're going to get it retuned, why didnthe tuner just hook it up to the factory bcs and zero out the wgdc's until your ready to crank it up? |
02-25-2009, 09:15 PM | #19 | |
Scooby Specialist
Member#: 4498
Join Date: Feb 2001
Chapter/Region:
NWIC
Location: Portland, Oregon
Vehicle:WRX H6-3.0 Turbo www.surgelinetuning.com |
Quote:
As for the timing, that was precisely what both Phatron and I were saying. (Perhaps we were actually hinting at something else with a bit of subtle nudge) Leaving the timing stock at 16psi with a larger turbo is perhaps not what many tuners would do. While the boost is 'low', any tune should include at least a quick look and adjustment of the timing. This is not a dig against Nate, as I do not know him or this tune. However it is important and helpful to have clarity in posts here. If someone else reads your post, they may be lead to believe that 'advancing the timing' is a valid tuning strategy. Cheers, Jeff Sponaugle |
|
02-25-2009, 09:15 PM | #20 |
Scooby Specialist
Member#: 4498
Join Date: Feb 2001
Chapter/Region:
NWIC
Location: Portland, Oregon
Vehicle:WRX H6-3.0 Turbo www.surgelinetuning.com |
|
02-25-2009, 11:03 PM | #21 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
LOL, WV rocks. Yeah, after I was made aware, I corrected myself. If adjusting timing a little bit is a good thing, then i'm quite certain that he did it. The car didn't even feel this smooth when i came off the dealer's lot.
|
02-26-2009, 02:17 AM | #22 | ||
Scooby Guru
Member#: 36033
Join Date: Apr 2003
Chapter/Region:
SCIC
Location: Tuning Lab
Vehicle:CEO PhatBottiTuning 2006 STi GTX3582 + Meth |
Quote:
Quote:
Your insistance that he didnt touch the timing is not a good thing at all. If i were to have read that and stopped there, i would never go to that place to get tuned. That being said, I dont believe he could have only tuned the AFR and not touched the timing. At 16 psi on the 20g you'd be riding the high load column probably the whole way to redline.....most likely the stock timing would be too much for a 20g. Theres probably a 0.0001% chance that the graph could be that smooth if he didnt touch the timing. You're gonna be very very happy at 20+ psi.......then you're gonna want more more more..... |
||
02-26-2009, 03:38 AM | #23 |
Scooby Specialist
Member#: 89752
Join Date: Jun 2005
Chapter/Region:
SCIC
Location: On the dyno at Yimi Sport
Vehicle:08 STI SWP |
I was thinking the same thing as Phatron and Sponaugle when I saw the OP's statement about timing not being touched. Hopefully we are talking about a conservative basemap being left alone, and not stock timing mapping being left alone. BTW, the dip at 3700 rpm is a knock event not a boost fluctuation. Boost fluctuations are wavy and more gradual looking. A knock event resulting in a timing pull will be a sharper drop which lasts for a few hundred rpms and then increments back up. You can clearly see the little trough that starts at roughly 3700 rpm and lasts till 4300 rpm at which point the curves return to their trend line. On a positive note, the spool up performance looks very good.
|
02-26-2009, 10:22 AM | #24 |
Scooby Newbie
Member#: 203275
Join Date: Feb 2009
Chapter/Region:
MAIC
Location: WV
Vehicle:2006 WRX SBR 20G More boost to come! |
Then i retract all previous statements and issue this one:
Its good and real fast. (jk) So can you please explain this knock event? Mongo no like knock. |
02-26-2009, 12:14 PM | #25 | |
Former Vendor
Member#: 33839
Join Date: Mar 2003
Chapter/Region:
South East
Location: Destin Fl.
Vehicle:2002 WRX Black |
Quote:
Nate is a great guy - he has to be or I would not let him touch my baby, let alone "gasp" drive it! (Still not sure if letting him drive will be a good idea or not, we will see soon!) http://www.youtube.com/teamslowboy Your next post will say - Have car - goes like stink. Then others will ask for details. Now you give details (even if not perfect, no one is) and they want less details if you do not know what you are talking about... GEEZ... Mike Huml Slowboy - |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TPG Tuned Small 16G - EJ205 - 93octane | Venphic | Proven Power Bragging | 32 | 01-11-2010 09:15 AM |
Tuning and the BigMAF | RainMaker | Engine Management & Tuning | 8 | 11-08-2005 03:10 PM |
MN Dyno days round 2, SBR 20G, and TEC 6H/50 | RiftsWRX | Factory 2.5L Turbo Powertrain (EJ Series Factory 2.5L Turbo) | 82 | 09-08-2005 01:55 PM |
XX Tuning and the DealMaster is back! | XX Tuning | Engine/Power/Exhaust | 12 | 02-19-2005 11:38 PM |