|
|
|
|
Thread Tools | Display Modes |
09-16-2012, 10:07 PM | #4151 | |
Scooby Specialist
Member#: 57287
Join Date: Mar 2004
Chapter/Region:
MWSOC
Location: Kalamazoo, MI
Vehicle:2002 Bugeye STi MY07 WRB FXT |
Quote:
However this issue has been discussed so many times in this thread, that it is so surprising people still ask this question...
* Registered users of the site do not see these ads.
|
|
09-16-2012, 10:47 PM | #4152 |
Scooby Specialist
Member#: 110078
Join Date: Mar 2006
Location: Long Island N.Y.
Vehicle:02 Bugeye JDM STi OBP BLACK |
Thanks Kayen, this thread is now 167 pages and getting difficult to find specific answers. The search didn't take me to a specific page where I could reference my question, it just gets me to this monster but awesome thread. After reading several pages I realized I should just ask, thanks for your help.
|
09-16-2012, 10:51 PM | #4153 |
Scooby Specialist
Member#: 224785
Join Date: Sep 2009
Chapter/Region:
MWSOC
Location: neenah
Vehicle:2005 wrx-jdm207 i went black... |
catback wont matter. make sure its 93 octane and stay off the throttle. like mentioned above if your worried get some race gas and throw two gallons in per tank to boost the rating up to like 95 octane. i ran my stock map right away and it never knocked under normal driving conditions. but then all gas quality is different. i also had the 850 injectors in right away and the scaling was a bit rich.
|
09-16-2012, 10:52 PM | #4154 |
Scooby Guru
Member#: 21339
Join Date: Jul 2002
Chapter/Region:
HIIC
Location: Kapolei, HI
Vehicle:2002 LHD STI V7 6MT 12.9@103MPH EJ205 4EAT |
The rule of thumb could/should be if you have to ask the answer is probably yes or recommended you know?
|
09-16-2012, 10:59 PM | #4155 |
Scooby Specialist
Member#: 224785
Join Date: Sep 2009
Chapter/Region:
MWSOC
Location: neenah
Vehicle:2005 wrx-jdm207 i went black... |
most def^^^ if you have a tactrix pull the rom. send it to me and ill take timing out so you can drive it around
|
09-17-2012, 12:44 AM | #4156 |
Scooby Specialist
Member#: 110078
Join Date: Mar 2006
Location: Long Island N.Y.
Vehicle:02 Bugeye JDM STi OBP BLACK |
A friend is mailing me a tactrix v1 cable on loan so I can get the maping taken care off. I have no idea how to use the cable, have to figure that out.
Will a octane booster product work if I can't get race fuel ? I have a perrin turbo inlet from the stock wrx motor with the stock td04, I'm under the impression that it'll work on the ej207 with the vf37, if so I'll definately bee installing it. I guess I should wait to install that till the car is getting mapped. Last edited by D-Rodman; 09-17-2012 at 12:51 AM. |
09-17-2012, 12:51 AM | #4157 | |
Scooby Guru
Member#: 21339
Join Date: Jul 2002
Chapter/Region:
HIIC
Location: Kapolei, HI
Vehicle:2002 LHD STI V7 6MT 12.9@103MPH EJ205 4EAT |
Quote:
I still have my version 1 cable. You'll need Rom raider and ECU flash. Both free |
|
09-17-2012, 12:56 AM | #4158 |
Scooby Specialist
Member#: 110078
Join Date: Mar 2006
Location: Long Island N.Y.
Vehicle:02 Bugeye JDM STi OBP BLACK |
Yeh, thanks, started looking into that, will ecuflash work with windows 7 or is it xp or vista only? Got confused about that when was reading the procedure on getting started.
|
09-17-2012, 01:04 AM | #4159 | |
Scooby Guru
Member#: 21339
Join Date: Jul 2002
Chapter/Region:
HIIC
Location: Kapolei, HI
Vehicle:2002 LHD STI V7 6MT 12.9@103MPH EJ205 4EAT |
Quote:
|
|
09-17-2012, 01:22 AM | #4160 |
Scooby Specialist
Member#: 110078
Join Date: Mar 2006
Location: Long Island N.Y.
Vehicle:02 Bugeye JDM STi OBP BLACK |
I'm getting a map made by Clark, I started reading the OS FAQ, it's 2:00am, time to sleep, have a couple of days to figure this out, not worried.
I saw the new version of ecu flash is windows 7 friendly. Last edited by D-Rodman; 09-17-2012 at 02:01 AM. |
09-17-2012, 07:30 AM | #4161 | |
Scooby Guru
Member#: 46135
Join Date: Oct 2003
Chapter/Region:
Tri-State
Location: NY
Vehicle:19 GLA45 AMG C63 AMG |
Quote:
I did not do pulls with it, drove normal and kept logging it. I ran through 3-4 tanks, logged, there was no knock. Took it once to top boost, to see if it really reaches stock over 18 PSI, it did 18.7 PSI, did not knock. If you use CAM2 100 (make sure UNLEADED), log and drive without making pulls, you can log and get the answer from the ECU, whether you're OK or not. |
|
09-17-2012, 08:41 AM | #4162 | |
Scooby Specialist
Member#: 57287
Join Date: Mar 2004
Chapter/Region:
MWSOC
Location: Kalamazoo, MI
Vehicle:2002 Bugeye STi MY07 WRB FXT |
Quote:
The best thing is that you will be able to fully enjoy your EJ207 without having to think if you are going to knock. |
|
09-17-2012, 05:28 PM | #4163 |
Scooby Newbie
Member#: 87871
Join Date: May 2005
|
No one got back to me on this but I found out some more info. The V7 AVCS cam spockets are superceded by the 04-07 USDM STI AVCS Cam sprockets. So even though they are different looking parts, they are interchangeable apparently. Anyone ever try this? This could be good news for anyone trying to maintain a V7 or V8. One less JDM specific part.
|
09-17-2012, 06:20 PM | #4164 | |
Scooby Guru
Member#: 6886
Join Date: May 2001
Chapter/Region:
Tri-State
Vehicle:MY01 EJ207 HTA35r AVCS ON! |
Quote:
|
|
09-17-2012, 07:11 PM | #4165 |
Scooby Newbie
Member#: 87871
Join Date: May 2005
|
This is according to Rallispec whom I was told can get JDM specific parts. They have access to the jdm parts system and emailed me a screen shot that says 13223AA050 (original JDM V7) is superceded by 13320AA000 (Same as USDM). This is for a RH Intake AVCS gear supposedly. If someone can confirm, we are in business and I will swap mine to confirm.
|
09-17-2012, 08:12 PM | #4166 |
Scooby Specialist
Member#: 224785
Join Date: Sep 2009
Chapter/Region:
MWSOC
Location: neenah
Vehicle:2005 wrx-jdm207 i went black... |
ecuflash works on xp, vista, and 7. some computers just suck and and they dont work at all. many driver problems arrise and things sometimes do not work out for some reasons.
|
09-17-2012, 08:38 PM | #4167 |
Scooby Guru
Member#: 46135
Join Date: Oct 2003
Chapter/Region:
Tri-State
Location: NY
Vehicle:19 GLA45 AMG C63 AMG |
13223AA050 substituted by 13320AA000, confirmed, for Rev A, B, C
13320AA000 substituted by 13320AA001 for rev D, E, F, G. 13223AA020 substituted by 13322AA000 for rev A, B, C 13322AA000 substituted by 13322AA001 for rev D, E, F, G |
09-17-2012, 10:08 PM | #4168 |
Scooby Guru
Member#: 166324
Join Date: Dec 2007
Chapter/Region:
NESIC
Location: BLOD in BLOD out
|
Does anyone know what this plugs into? Coming from the turbo area...
|
09-17-2012, 10:17 PM | #4169 |
Scooby Guru
Member#: 13617
Join Date: Dec 2001
Chapter/Region:
MWSOC
Location: MN
Vehicle:2001 Legacy GT back to stock is a project too |
|
09-17-2012, 10:46 PM | #4170 |
Scooby Newbie
Member#: 297718
Join Date: Oct 2011
Chapter/Region:
International
Location: New Zealand
Vehicle:2001 V7 Sti Prodrive White |
Just a heads up on something that I don't think has been covered in this thread regarding the factory tune and 93oct.
Here in New Zealand we have JDM imports, there are are number of STI's factory equipted with the ej207 running on the stock tune on 95 or 95ron which is equvilant to 90oct and 93oct, Yes they do knock. (I usually see upto 6 degrees on all the cars I have looked at.) But at the same time the ecu does its job and pulls timing accordingly, Most cars I look at have the IAM at 16 with Learned knock in the upper load region. The main point of this post is to tell everyone that yes it will knock (this has been covered before) but these cars are lasting upwards of 120,000miles (We don't have a huge number of high ways so average miles for a car is 10-12,000 per year. Some of these cars even have a downpipe and still run the factory tune, the ecu is smarter than most think. |
09-17-2012, 10:52 PM | #4171 |
Scooby Specialist
Member#: 110078
Join Date: Mar 2006
Location: Long Island N.Y.
Vehicle:02 Bugeye JDM STi OBP BLACK |
Gotta figure out the oil radiator situation, mishimoto has a good mounting setup, not a dirrect ej207 fit.
Last edited by D-Rodman; 09-18-2012 at 12:45 AM. |
09-18-2012, 12:05 AM | #4172 |
Scooby Newbie
Member#: 87871
Join Date: May 2005
|
|
09-18-2012, 04:50 AM | #4173 |
Scooby Guru
Member#: 166324
Join Date: Dec 2007
Chapter/Region:
NESIC
Location: BLOD in BLOD out
|
|
09-18-2012, 07:31 AM | #4174 |
Scooby Guru
Member#: 46135
Join Date: Oct 2003
Chapter/Region:
Tri-State
Location: NY
Vehicle:19 GLA45 AMG C63 AMG |
|
09-18-2012, 12:21 PM | #4175 |
Scooby Specialist
Member#: 224785
Join Date: Sep 2009
Chapter/Region:
MWSOC
Location: neenah
Vehicle:2005 wrx-jdm207 i went black... |
well if its a ground coming from the engine a good idea would be get a longer piece of wire and run one from the body to the clip via a male spade or just solder them together. your jdm engine came with it but the wrx you have did no probably.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ej207 owner wants opinions | adbramsay | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 2 | 02-26-2011 07:29 PM |
Ej207 V6 | AndrewFD3 | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 10 | 06-03-2010 04:53 PM |
JDM Sti EJ207 V9 crank 75mm or billet crank (K1, Manley) VENDORS ??? | L'frise | Private 'Wanted' Classifieds | 7 | 06-03-2010 09:24 AM |
08 ej207 JDM dual AVCS heads on a built v7 ej207 | icev7 | Built Motor Discussion | 17 | 02-21-2010 03:21 PM |
Ver 8 EJ207 Owners Check In | spoolinsuby | Factory 2.0L Turbo Powertrain (EJ Series Factory 2.0L Turbo) | 21 | 10-17-2005 01:56 AM |