|
|
|
|
Thread Tools | Display Modes |
06-26-2015, 12:49 PM | #1 |
Scooby Specialist
Member#: 375462
Join Date: Dec 2013
Chapter/Region:
NWIC
Location: Portland, OR
Vehicle:2006 Impreza WRX STI WR Blue |
FSM Errata - Transmission Crossmember Torque
I find myself looking up old threads for this correction every time I do transmission work... would be worth making this a sticky.
Correct torque specs for transmission crossmember bolts: Some have reported issues with 52 ft-lb spec. on rear 4 bolts. Reduce torque on these 4 bolts at your own discretion.
* Registered users of the site do not see these ads.
|
06-26-2015, 03:00 PM | #2 |
Scooby Specialist
Member#: 216984
Join Date: Jul 2009
Chapter/Region:
NWIC
Location: Coeur D Alene, ID
Vehicle:1996 Impreza outback Green |
I agree about the rear 4 bolts on the cross member, those are NOT the ones that you want to strip out. 40 ft lbs would probably be a safer bet. Same with the front two larger bolts, 90-95 ft lbs does the job just fine. No need to max them out though and find out the hard way...
|
06-26-2015, 06:42 PM | #3 |
Scooby Specialist
Member#: 375462
Join Date: Dec 2013
Chapter/Region:
NWIC
Location: Portland, OR
Vehicle:2006 Impreza WRX STI WR Blue |
FWIW, I've torqued them as the image shows without issue probably 75-100 times across 3 vehicles.
|
Thread Tools | |
Display Modes | |
|
|