TGV Sensor broke, I need to confirm the right part

vsmack · 11-04-2009, 10:07 PM

I've search around Nasioc carefully and my friend has an 2006 WRX. He broke the sensor and I found this number 22633AA210 but for older models.

I found it here: http://forums.nasioc.com/forums/showthread.php?t=630216

The sensor is in the picture so if someone could confirm this I would really appreciate it and where's a good place to buy it?

Uncle Scotty · 11-04-2009, 11:26 PM

google is your friend

a part number is a part number

what is the problem??

vsmack · 11-05-2009, 12:25 AM

The problem is that I've had trouble confirming the part number, had trouble at subarugenuineparts.com etc finding it. It's my first time actually asking because I haven't really found a concrete answer.
What happened was that he was working with his car and he broke the sensor. Whenever he hits around 3.5K or so rpm at full throttle it feels like it hits fuel cut and you hear like a backfire through the external wastegate. Sounds bad but the car runs fine below it.

Also he got engine codes p1491, p2016, p2433, and p2431.

Our conclusion is that it's that part obviously. Also, the local subbie mechanic suggested that he did the TGV delete once n for all and clear the codes when he gets retuned.
Anyhow that's the problem in general.

Any insight would be appreciated. Thanks

STIBungy · 11-05-2009, 01:20 AM

On the older wrx/sti, the sensor was one one end and the motor was on the other. On the newer ones, the motor and sensor are integrated.

vsmack · 11-05-2009, 12:24 PM

Really! My friend said his looks exactly like the one on top in the picture

573 · 11-05-2009, 05:58 PM

Quote:

Originally Posted by STIBungy

On the older wrx/sti, the sensor was one one end and the motor was on the other. On the newer ones, the motor and sensor are integrated.

Negative.

I have some sensors and motors from a 2007 sitting around from when I did the TGV delete mod. If you don't mind waiting a few weeks, I can send you a sensor next time I'm home.

importlife · 11-05-2009, 09:21 PM

I will like to get that part #. I haven't been able to find it anywhere including subaru Genuine parts.
Thanks for your help!

importlife · 11-06-2009, 09:13 PM

Quote:

Originally Posted by 573

Negative.

I have some sensors and motors from a 2007 sitting around from when I did the TGV delete mod. If you don't mind waiting a few weeks, I can send you a sensor next time I'm home.

When you expect to be home?! I need it ASAP and Seems like no one here know the F.. part #.
Thanks

573 · 11-07-2009, 12:20 AM

Quote:

Originally Posted by importlife

When you expect to be home?! I need it ASAP and Seems like no one here know the F.. part #.
Thanks

I won't be home until the 25th. If you still don't have it by then, pm me and I'll send it out promptly.

Darkness Of Death · 11-07-2009, 10:37 AM

i can't seem to find mine...i took them off before i sold the tgv's.

i dont think they would have changed the sensor..it's very possible they might have changed the part number for the exact same part as well

STIBungy · 11-08-2009, 12:59 PM

I guess the STI must be different than the WRX. I bought a set of TGVs off an 07 STI. I still have the TGV motor/sensors somewhere.

Quote:

Originally Posted by 573

Negative.

I have some sensors and motors from a 2007 sitting around from when I did the TGV delete mod. If you don't mind waiting a few weeks, I can send you a sensor next time I'm home.

importlife · 11-08-2009, 08:50 PM

PM me for sale of the passenger side sensor
Thanks

GT35RHybrid · 11-09-2009, 10:20 AM

PM me for sale of both sides of TGV sensors and motor.

VIR EURORALLY · 11-09-2009, 11:59 AM

The TGV and TPS sensors are the same.

22633AA210

White out · 11-09-2009, 04:08 PM

If you haven't found any luck with the tgv sensors/motors PM me. I can send you mine, just cover shipping.

Thinking about it, you might just want to delete the tgvs & have the rod holes welded shut (local welding company could do it in less than a day). The only parts you would need is new intake manifold gaskets.

Nick

11-04-2009, 10:07 PM	#1
vsmack Scooby Newbie Member Sales Rating: (0) Member#: 92872 Join Date: Aug 2005	TGV Sensor broke, I need to confirm the right part I've search around Nasioc carefully and my friend has an 2006 WRX. He broke the sensor and I found this number 22633AA210 but for older models. I found it here: http://forums.nasioc.com/forums/showthread.php?t=630216 The sensor is in the picture so if someone could confirm this I would really appreciate it and where's a good place to buy it?

11-07-2009, 10:37 AM	#10
Darkness Of Death Scooby Newbie Member Sales Rating: (5) Member#: 167172 Join Date: Dec 2007 Chapter/Region: E. Canada Location: ontario, canada Vehicle: 2007 B Spec	i can't seem to find mine...i took them off before i sold the tgv's. i dont think they would have changed the sensor..it's very possible they might have changed the part number for the exact same part as well Last edited by Darkness Of Death; 11-07-2009 at 10:44 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2009, 11:26 PM	#2
Uncle Scotty Scooby Guru Member Sales Rating: (5) Member#: 16200 Join Date: Mar 2002 Vehicle: tic- toc the countdown has started	google is your friend a part number is a part number what is the problem??

11-05-2009, 12:25 AM	#3
vsmack Scooby Newbie Member Sales Rating: (0) Member#: 92872 Join Date: Aug 2005	The problem is that I've had trouble confirming the part number, had trouble at subarugenuineparts.com etc finding it. It's my first time actually asking because I haven't really found a concrete answer. What happened was that he was working with his car and he broke the sensor. Whenever he hits around 3.5K or so rpm at full throttle it feels like it hits fuel cut and you hear like a backfire through the external wastegate. Sounds bad but the car runs fine below it. Also he got engine codes p1491, p2016, p2433, and p2431. Our conclusion is that it's that part obviously. Also, the local subbie mechanic suggested that he did the TGV delete once n for all and clear the codes when he gets retuned. Anyhow that's the problem in general. Any insight would be appreciated. Thanks

11-05-2009, 01:20 AM	#4
STIBungy Scooby Specialist Member Sales Rating: (48) Member#: 51684 Join Date: Jan 2004 Location: Denver, CO Vehicle: 2004 Impreza WRX STI PSM	On the older wrx/sti, the sensor was one one end and the motor was on the other. On the newer ones, the motor and sensor are integrated.

11-05-2009, 12:24 PM	#5
vsmack Scooby Newbie Member Sales Rating: (0) Member#: 92872 Join Date: Aug 2005	Really! My friend said his looks exactly like the one on top in the picture

11-05-2009, 09:21 PM	#7
importlife Scooby Newbie Member Sales Rating: (0) Member#: 155488 Join Date: Jul 2007 Location: SUBARU LAND PR Vehicle: 2006 wrx	I will like to get that part #. I haven't been able to find it anywhere including subaru Genuine parts. Thanks for your help!

11-08-2009, 08:50 PM	#12
importlife Scooby Newbie Member Sales Rating: (0) Member#: 155488 Join Date: Jul 2007 Location: SUBARU LAND PR Vehicle: 2006 wrx	PM me for sale of the passenger side sensor Thanks

11-09-2009, 10:20 AM	#13
GT35RHybrid Scooby Newbie Member Sales Rating: (1) Member#: 223237 Join Date: Sep 2009 Chapter/Region: South East Location: Boonies	PM me for sale of both sides of TGV sensors and motor.

11-09-2009, 11:59 AM	#14
VIR EURORALLY Scooby Specialist Member Sales Rating: (17) Member#: 53517 Join Date: Jan 2004 Chapter/Region: MAIC Location: Flat4VA Vehicle: STi Outback STi Epic Motorsports	The TGV and TPS sensors are the same. 22633AA210

11-09-2009, 04:08 PM	#15
White out Scooby Guru Member Sales Rating: (54) Member#: 46277 Join Date: Oct 2003 Chapter/Region: MWSOC Location: Michigan Vehicle: 1998 Hummer OpenTop 1999 Dodge Viper GTS ACR	If you haven't found any luck with the tgv sensors/motors PM me. I can send you mine, just cover shipping. Thinking about it, you might just want to delete the tgvs & have the rod holes welded shut (local welding company could do it in less than a day). The only parts you would need is new intake manifold gaskets. Nick