|
|
|
|
Thread Tools | Display Modes |
05-08-2013, 05:12 PM | #1 |
Scooby Newbie
Member#: 341421
Join Date: Dec 2012
Location: cleveland
Vehicle:2008 wrx sedan wr blue |
2008 wrx sedan daytime running lights
i have a 2008 wrx and as soon as i put the key in the ignition the lights go on. im trying to put HID's in and i dont want them to stay on all the time.I read in some other fourms that you can find the grey box under the air box and pull the wire on that but it doesnt work. does anyone have this issue? please help!!!
* Registered users of the site do not see these ads.
|
05-08-2013, 07:34 PM | #2 |
Scooby Newbie
Member#: 348014
Join Date: Feb 2013
Chapter/Region:
NESIC
Location: Worcester, MA.
Vehicle:2010 2.5i Orange |
If you put HID for your high beams that's where the DTRL are at the light won't turn on because the blast will not be getting enough power to enable the DTRL. I had HID for high beams and the DTRL never worked because not sufficient power to the blast to power the HID. Hope this helps if not I would say connect your HID and you'll see what I'm talking about..
Good Luck Dude |
05-08-2013, 11:28 PM | #3 |
Scooby Newbie
Member#: 295565
Join Date: Sep 2011
Chapter/Region:
Tri-State
|
are you sure you unplugged the correct connector?
|
05-09-2013, 01:15 AM | #4 |
Scooby Newbie
Member#: 266514
Join Date: Dec 2010
Chapter/Region:
MAIC
Location: Maryland
Vehicle:2011 OBP STi Sedan OBP |
Theres a DIY on how to properly disable the DTRL. Its somewhere in this section of the forum too. Just search. Its behind the glove box and its a yellow connector. You disconnect that and should be good to go from what I understand.
Edit: Here's two links first one is to a '13 http://forums.nasioc.com/forums/show....php?t=2424247 Here's one to 06? http://forums.nasioc.com/forums/show....php?t=1189213 Don't have 08 but one of these will work for you. Last edited by aznboi0204; 05-10-2013 at 04:05 PM. |
Thread Tools | |
Display Modes | |
|
|