|
Brakes & Suspension Forum sponsored by The Tire Rack |
|
|
|
Thread Tools | Display Modes |
11-29-2012, 11:09 PM | #1 |
Scooby Guru
Member#: 170349
Join Date: Jan 2008
Chapter/Region:
SCIC
Location: Yorba linda, Ca
Vehicle:2020 997TT,fx35,sti WR Blue w/ carbon bits |
Which Adjustable Camber Plates will work on my KW v3 Coilovers
I ordered some ISC Front and Rear Camber Plates for my Kw suspension that was going to go on my 07 sti. Unfortunately, I found that the thrust bearing design covers all of the threads on the strut, so once the camber plate is installed, there is literally no thread to work with to screw the main bolt on.
What Front camber plates will successfully work with my kw v3 coilovers? To my knowledge in the back you cant use camber plates unless you convert the rear spring, correct me if I'm wrong (I had Cusco's on my old kw suspension, but didn't expect isc camber plates to be different..)
* Registered users of the site do not see these ads.
Last edited by Blackout713; 11-29-2012 at 11:17 PM. |
11-29-2012, 11:22 PM | #2 |
Scooby Guru
Member#: 71875
Join Date: Oct 2004
Location: Montana
|
RCE/GTWorx, Ground Control, and Vorshlag will definitely all work.
|
11-29-2012, 11:26 PM | #3 |
Scooby Guru
Member#: 170349
Join Date: Jan 2008
Chapter/Region:
SCIC
Location: Yorba linda, Ca
Vehicle:2020 997TT,fx35,sti WR Blue w/ carbon bits |
Awesome thanks
|
11-30-2012, 07:21 AM | #4 |
Hoodbridge!
Moderator Member#: 560
Join Date: Nov 1999
Chapter/Region:
MAIC
Location: Woodbridge, VA
Vehicle:2006 STi, 16 Outback Crystal Gray, Silver |
I use Vorshlag camber plates in the front. Been great so far!
|
11-30-2012, 12:45 PM | #5 |
Former Vendor
Member#: 93646
Join Date: Aug 2005
Chapter/Region:
MWSOC
Vehicle:Many Track Records Let us help you go fast! |
Those other mentioned plates will only work with a straight rate rear conversion on the V3's. We have done many conversions with Vorshlag and MSI camber plates and had no problems, but there is some specific hardware that is needed to bring it all together.
Let us know if we can help you get what you need. Tony |
11-30-2012, 02:11 PM | #6 |
Scooby Specialist
Member#: 20952
Join Date: Jul 2002
Chapter/Region:
MAIC
Location: Baltimore, MD
Vehicle:BRZ & Datsun White & White |
Racecomp also sells a rear linear conversion kit that will let you use rear camber plates.
- Andrew |
Thread Tools | |
Display Modes | |
|
|